久久久久久久999_99精品久久精品一区二区爱城_成人欧美一区二区三区在线播放_国产精品日本一区二区不卡视频_国产午夜视频_欧美精品在线观看免费

標題: 1602+lanya+ds18b20 用藍牙設置的溫度和ds18b20進行比較 [打印本頁]

作者: 一龍大師 時間: 2017-12-28 19:17
標題: 1602+lanya+ds18b20 用藍牙設置的溫度和ds18b20進行比較
#include <reg51.h>
#define uchar unsigned char
#define uint unsigned int
sbit rw = P3^6;
sbit RS = P3^5;
sbit ds = P2^2;
sbit LCDEN = P3^4;
sbit beep=P2^3;
uchar table1[10];
uchar code table[] = " test temp:";
int i,tmp;
float value,tempss;

void delayMs(uint a)  //延時
{
uint i, j;
for(i = a; i > 0; i--)
      for(j = 100; j > 0; j--);
}

void writeComm(uchar comm)
{
RS = 0;
P0 = comm;
delayMs(5);
LCDEN = 1;
delayMs(5);
LCDEN = 0;
}

void writeData(uchar dat)
{
   RS = 1;
   P0 = dat;
   delayMs(1);
   LCDEN = 1;
   delayMs(1);
   LCDEN = 0;

}

void init()
{
   rw = 0;
   writeComm(0x38);
   writeComm(0x0c);
   writeComm(0x06);
   writeComm(0x01);
}

void writeString(uchar * str, uchar length)
{
   uchar i;
   for(i = 0; i < length; i++)
   {
      writeData(str[i]);
   }
}
void inits()
{
      TMOD=0X20;//T1工作在方式2及自動重裝
      TH1=0XFD;//波特率9600
      TL1=0XFD;
      TR1=1;
      SM0=0;
      SM1=1;
      REN=1;
      ES=1;  //啟動串口中斷
      EA=1;
}
void displays()
{
tempss=(table1[0]-48)*1000+(table1[1]-48)*100;
writeComm(0x80);
writeString(table,11);
writeComm(0x80+12);
for(i=0;i<2;i++)
{
   writeData(table1[i]);
      delayMs(100);
}
}

//ds18b20
void dsInit()
{

   unsigned int i;
   ds = 0;
   i = 100;
   while(i>0)
   i--;
   ds = 1;
   i = 4;
   while(i>0)
   i--;
}

bit readBit()
{
unsigned int i;
bit b;
ds = 0;
i++;
ds = 1;
i++;
i++;
b = ds;
i = 8;
while(i>0)
i--;
return b;
}

unsigned char readByte()
{
   unsigned int i;
   unsigned char j, dat;
   dat = 0;
   for(i=0; i<8; i++)
   {
      j = readBit();

      dat = (j << 7) | (dat >> 1);
   }
return dat;
}

void writeByte(unsigned char dat)
{
int i,j;
for(j=0;j<8;j++)
{
   ds=0;
   i++;
   ds=dat&0x01;
   i=6;
   while(i--);
   ds=1;
   dat>>=1;
   }
}

void sendChangeCmd()//溫度轉化命令
{
dsInit();
delayMs(1);
writeByte(0xcc);
writeByte(0x44);
}

void sendReadCmd() //讀取溫度
{
dsInit();
delayMs(1);
writeByte(0xcc);
writeByte(0xbe);
}

int getTmpValue()
{

unsigned int tmpvalue;
float t;
unsigned char low, high;
sendReadCmd();
low = readByte();
high = readByte();
tmpvalue = high;
tmpvalue <<= 8;
tmpvalue |= low;
value = tmpvalue;

t = value * 0.0625;

value = t * 100 + (value > 0 ? 0.5 : -0.5); //大于0加0.5, 小于0減0.5
return value;
}

void display()
{
unsigned char count;
unsigned char datas[] = {0, 0, 0, 0, 0};
tmp =getTmpValue();
datas[0] = tmp / 10000;
datas[1] = tmp % 10000 / 1000;
datas[2] = tmp % 1000 / 100;
datas[3] = tmp % 100 / 10;
datas[4] = tmp % 10;

writeComm(0xc0+3);
if(tmp< 0)
{
      writeString("- ", 1);
}
else
{
   writeString("+ ", 1);
}
for(count = 1; count < 5; count++)
{
      writeData('0'+datas[count]);
      if(count == 2)
      {
         writeData('.');
      }
}

}

void main()
{
init();
while(1)
{
        inits();
        displays();
        sendChangeCmd();//發送溫度轉化命令
      delayMs(750); //溫度轉換時間需要750ms以上
      writeComm(0xc0);
      display();
   if(tempss>tmp)
   {
         beep=0;
   P1=0X00;
   }
   else
   {
      beep=1;
   P1=0Xff;
   }
}

}

void uate() interrupt 4
{
      ES=0; //先關閉串口中斷防止出錯
for(i=0;i<2;i++)
{
      while(!RI);
         RI=0;  //發送標志位清零
         table1[i]=SBUF;
   }
      ES=1;//啟動串口中斷，繼續發送
}

作者: 17807709656 時間: 2019-10-23 08:46
能寫一個藍牙控速的程序和ds18b20顯示溫度的程序嗎

歡迎光臨 (http://www.zg4o1577.cn/bbs/)