欧美日韩精品一区二区,成人18视频在线观看,日本在线免费观看

//==================================如何切換橫豎屏顯示=======================================//
//打開Lcd_Driver.h頭文件，修改宏#define USE_HORIZONTAL 值為0使用豎屏模式.1,使用橫屏模式
//===========================如何切換模擬SPI總線驅動和硬件SPI總線驅動=========================//
//打開Lcd_Driver.h頭文件，修改宏#define USE_HARDWARE_SPI 值為0使用模擬SPI總線.1,使用硬件SPI總線
/*Voltage[4]:電壓
*I_current[4]：電流
*direction[4]：方向
*speed[4]：速度
*temperature[4]：溫度*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
#include "Lcd_Driver.h"
#include "LCD_Config.h"
#include "GUI.h"
#include "delay.h"
#include "Picture.h"
#define uint unsigned int
#define uchar unsigned char
GPIO_InitTypeDef GPIO_InitStructure;
void RCC_Configuration(void);
void Delayms(__IO uint32_t nCount);
uchar Num[10]={0,1,2,3,4,5,6,7,8,9};
uchar number[4],nnn=100;
uchar Voltage[4],I_current[4],direction[4],speed[4],temperature[4];
void Redraw_Mainmenu(void)
{
Lcd_Clear(GRAY0);
Gui_DrawFont_GBK16(16,2,BLUE,GRAY0,"后備保護系統");
DisplayButtonUp(15,26,113,50); //x1,y1,x2,y2
Gui_DrawFont_GBK16(15,30,RED,GRAY0,"電流:");
sprintf(I_current ,"%d",nnn);
Gui_DrawFont_GBK16(54, 30, RED, GRAY0,I_current);
Gui_DrawFont_GBK16(92,30,RED,GRAY0,"A");
DisplayButtonUp(15,51,113,75); //x1,y1,x2,y2
Gui_DrawFont_GBK16(16,55,RED,GRAY0,"電壓:");
sprintf(Voltage,"%d",nnn);
Gui_DrawFont_GBK16(54, 55, RED, GRAY0,Voltage);
Gui_DrawFont_GBK16(92,55,RED,GRAY0,"V");
DisplayButtonUp(15,76,113,100); //x1,y1,x2,y2
Gui_DrawFont_GBK16(16,80,RED,GRAY0,"方向:");
Gui_DrawFont_GBK16(54,80,RED,GRAY0,"上行");
DisplayButtonUp(15,101,113,125); //x1,y1,x2,y2
Gui_DrawFont_GBK16(16,105,RED,GRAY0,"轉速:");
sprintf(speed,"%d",nnn);
Gui_DrawFont_GBK16(54, 105, RED, GRAY0,speed);
Gui_DrawFont_GBK16(84,105,RED,GRAY0,"m/s");
DisplayButtonUp(15,126,113,150); //x1,y1,x2,y2
Gui_DrawFont_GBK16(16,130,RED,GRAY0,"溫度:");
sprintf(temperature,"%d",nnn);
Gui_DrawFont_GBK16(54, 130, RED, GRAY0,temperature);
Gui_DrawFont_GBK16(92,130,RED,GRAY0,"度");
}
//u16 ID=0;
int main(void)
{
SystemInit();
delay_init(72);//延時初始化
Lcd_Init();//初始化硬件SPI
Redraw_Mainmenu();
while(1)
{
}
}
//void RCC_Configuration(void)
//{
// /* 設置微控制器系統，初始化嵌入式FLASH接口，初始化PLL并更新系統頻率變量 */
// SystemInit();
//}
void Delayms(__IO uint32_t nCount)
{
for(; nCount != 0; nCount--);
}
#ifdef USE_FULL_ASSERT
/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval : None
*/
void assert_failed(uint8_t* file, uint32_t line)
……………………
…………限于本文篇幅余下代碼請從51黑下載附件…………

復制代碼

久久久久久久999_99精品久久精品一区二区爱城_成人欧美一区二区三区在线播放_国产精品日本一区二区不卡视频_国产午夜视频_欧美精品在线观看免费