欧美日韩三区,中国一级毛片,国产一级一级国产

半加器代碼
ENTITY lytadder5091 IS
PORT(A, B:IN bit;
C, Sum:OUT bit);
END ENTITY lytadder5091;
ARCHITECTURE rtl of lytadder5091 is
begin
Sum<=(A XOR B);
C<=(A AND B);
END ARCHITECTURE rtl;
全加器代碼
ENTITY quanjiaqi5091 IS
PORT(A, B, D:IN bit;
C, Sum:OUT bit);
END ENTITY quanjiaqi5091;
ARCHITECTURE rtl of quanjiaqi5091 is
begin
Sum<=A XOR B XOR D;
C<=(A AND B)OR(A AND D)OR(D AND B);
END ARCHITECTURE rtl;
三人表決器代碼(一燈)
ENTITY SRBJQ5091 IS
PORT(A, B,C:IN bit;
JIEGUO:OUT bit);
END ENTITY SRBJQ5091;
ARCHITECTURE rtl of SRBJQ5091 is
begin
JIEGUO<=(A AND B)OR(A AND C)OR(C AND B);
END ARCHITECTURE rtl;
三人表決器代碼(8燈)
ENTITY SRBJQ5091 IS
PORT(A, B,C:IN bit;
D0,D1,D2,D3,D4,D5,D6,D7:OUT bit);
END ENTITY SRBJQ5091;
ARCHITECTURE rtl of SRBJQ5091 is
begin
D0<=(A AND B)OR(A AND C)OR(C AND B);
D1<=(A AND B)OR(A AND C)OR(C AND B);
D2<=(A AND B)OR(A AND C)OR(C AND B);
D3<=(A AND B)OR(A AND C)OR(C AND B);
D4<=(A AND B)OR(A AND C)OR(C AND B);
D5<=(A AND B)OR(A AND C)OR(C AND B);
D6<=(A AND B)OR(A AND C)OR(C AND B);
D7<=(A AND B)OR(A AND C)OR(C AND B);
END ARCHITECTURE rtl;
三人表決器（1燈）
ENTITY SRBJQ5091 IS
PORT(A, B,C:IN bit;
D:OUT bit);
END ENTITY SRBJQ5091;
ARCHITECTURE rtl of SRBJQ5091 is
begin
cale:process(A,B,C)
VARIABLE TMP1,TMP2,TMP3,TMP4:BIT;
BEGIN
TMP1:=A AND B;
TMP2:=A AND C;
TMP3:=B AND c;
TMP4:=TMP1 OR TMP2 OR TMP3;
d<=tmp4;
END PROCESS;
END ARCHITECTURE rtl;
三人表決器（8燈）
ENTITY SRBJQ5091 IS
PORT(A, B,C:IN bit;
D:OUT bit_VECTOR(0 TO 7));
END ENTITY SRBJQ5091;
ARCHITECTURE rtl of SRBJQ5091 is
begin
cale:process(A,B,C)
VARIABLE TMP1,TMP2,TMP3,TMP4:BIT;
BEGIN
TMP1:=A AND B;
TMP2:=A AND C;
TMP3:=B AND c;
TMP4:=TMP1 OR TMP2 OR TMP3;
d(0)<=tmp4;d(1)<=tmp4;
d(2)<=tmp4;d(3)<=tmp4;
d(4)<=tmp4;d(5)<=tmp4;
d(6)<=tmp4;d(7)<=tmp4;
END PROCESS;
END ARCHITECTURE rtl;
三人表決器
ENTITY SRBJQ5091 IS
PORT(A, B,C:IN bit;
D:OUT bit_vector(0 to 7));
END ENTITY SRBJQ5091;
ARCHITECTURE rtl of SRBJQ5091 is
begin
cale:process(A,B,C)
BEGIN
if ((A AND B)OR(A AND C)OR(C AND B))='0'
then d<="00000000";
else d<="11111111";
end if;
END PROCESS;
END ARCHITECTURE rtl;
四人表決器
ENTITY SRBJQ5091 IS
PORT(A, B,C,E:IN bit;
D:OUT bit_vector(0 to 7));
END ENTITY SRBJQ5091;
ARCHITECTURE rtl of SRBJQ5091 is
begin
cale:process(A,B,C,E)
BEGIN
if ((A AND B)OR(A AND E)OR(C AND A))='1'
then d<="00000000";
else d<="11111111";
end if;
END PROCESS;
END ARCHITECTURE rtl;
七段譯碼器
-
LIBRARY ieee;
USE ieee.std_logic_1164.ALL;
ENTITY QIDUANYIMAQI IS
PORT(bcdin : IN std_logic_vector(3 DOWNTO 0）;
segout : OUT std_logic_vector(6 DOWNTO 0);
T : OUT BIT);
END QIDUANYIMAQI;
ARCHITECTURE ver3 OF QIDUANYIMAQI IS
BEGIN
T<='0';
WITH bcdin SELECT
segout <= "0000001" WHEN X"0",
"1001111" WHEN X"1",
"0010010" WHEN X"2",
"0000110" WHEN X"3",
"1001100" WHEN X"4",
"0100100" WHEN X"5",
"0100000" WHEN X"6",
"0001111" WHEN X"7",
"0000000" WHEN X"8",
"0000100" WHEN X"9",
"1111111" WHEN OTHERS;
END ver3;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity xue is
port (
clkin:in std_logic;
clkout:out std_logic_vector(7 downto 0);
enout:out std_logic_vector(3 downto 0)
);
end entity;
architecture behave of xue is
signal mtime:std_logic_vector(15 downto 0);
signal me:std_logic_vector(1 downto 0);
signal m7_0:std_logic_vector(7 downto 0);
signal m7_1:std_logic_vector(7 downto 0);
signal m7_2:std_logic_vector(7 downto 0);
signal m7_3:std_logic_vector(7 downto 0);
begin
process(clkin)
begin
if(clkin'event and clkin='1')then
mtime<=mtime+1;
if(mtime="1000000000000000")then
mtime<=(others=>'0');
if(me="11")then
me<=(others=>'0');
else
me<=me+1;
end if;
end if;
m7_0<="10011110";
m7_1<="00001000";
m7_2<="00000010";
m7_3<="01001000";
if(me="00")then
enout<="1110";
clkout<=m7_0;
end if;
if(me="01")then
enout<="1101";
clkout<=m7_1;
end if;
if(me="10")then
enout<="1011";
clkout<=m7_2;
end if;
if(me="11")then
enout<="0111";
clkout<=m7_3;
end if;
end if;
end process;
end behave;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity xue is
port (c:in bit;
clkin:in std_logic;
clkout:out std_logic_vector(7 downto 0);
enout:out std_logic_vector(3 downto 0)
);
end entity;
architecture behave of xue is
signal mtime:std_logic_vector(15 downto 0);
signal me:std_logic_vector(1 downto 0);
signal m7_0:std_logic_vector(7 downto 0);
signal m7_1:std_logic_vector(7 downto 0);
signal m7_2:std_logic_vector(7 downto 0);
signal m7_3:std_logic_vector(7 downto 0);
signal m0:std_logic_vector(7 downto 0);
signal m1:std_logic_vector(7 downto 0);
signal m2:std_logic_vector(7 downto 0);
signal m3:std_logic_vector(7 downto 0);
begin
process(clkin,c)
begin
if(clkin'event and clkin='1')then
mtime<=mtime+1;
if(mtime="1000000000000000")then
mtime<=(others=>'0');
if(me="11")then
me<=(others=>'0');
else
me<=me+1;
end if;
end if;
m7_0<="10011110";
m7_1<="00001000";
m7_2<="00000010";
m7_3<="01001000";
m0<="00011110";
m1<="00000010";
m2<="10011110";
m3<="00100100";
if(me="00"and c='1')then
enout<="1110";
clkout<=m7_0;
end if;
if(me="001"and c='1')then
enout<="1101";
clkout<=m7_1;
end if;
if(me="010"and c='1')then
enout<="1011";
clkout<=m7_2;
end if;
if(me="011"and c='1')then
enout<="0111";
clkout<=m7_3;
end if;
if(me="000"and c='0')then
enout<="1110";
clkout<=m0;
end if;
if(me="001"and c='0')then
enout<="1101";
clkout<=m1;
end if;
if(me="010"and c='0')then
enout<="1011";
clkout<=m2;
end if;
if(me="011"and c='0')then
enout<="0111";
clkout<=m3;
end if;
end if;
end process;
end behave;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity qiduanyimaqi5091 is
port (
clk:in std_logic;--時鐘信號
led:out std_logic_vector(7 downto 0);--led燈
led1_4:out std_logic_vector(3 downto 0)--選擇觸發的
);
end entity qiduanyimaqi5091;
architecture lyt of qiduanyimaqi5091 is
signal clk1:std_logic_vector(15 downto 0);
signal clk2:std_logic_vector(2 downto 0);
signal m0:std_logic_vector(7 downto 0);
signal m1:std_logic_vector(7 downto 0);
signal m2:std_logic_vector(7 downto 0);
signal m3:std_logic_vector(7 downto 0);
signal m4:std_logic_vector(7 downto 0);
signal m5:std_logic_vector(7 downto 0);--保存十個不同數字的信號
signal m6:std_logic_vector(7 downto 0);
signal m7:std_logic_vector(7 downto 0);
signal m8:std_logic_vector(7 downto 0);
signal m9:std_logic_vector(7 downto 0);
begin
process(clk)
begin
if(clk'event and clk='1')then
clk1<=clk1+1;
if(clk1="1000000000000000")then
clk1<=(others=>'0'); ---時鐘控制
if(clk2="011")then
clk2<=(others=>'0');
else
clk2<=clk2+1;
end if;
end if;
m0<="00000011";
m1<="10011111";
m2<="00100101";
m3<="00001101";
m4<="10011001";--儲存十個不同數字
m5<="01001001";
m6<="01000001";
m7<="00011111";
m8<="00000001";
m9<="00001001";
if(clk2="000")then
led1_4<="0111";
led<=m5;
end if;
if(clk2="001")then
led1_4<="1011";
led<=m0; --賦值
end if;
if(clk2="010")then
led1_4<="1101";
led<=m9;
end if;
if(clk2="011")then
led1_4<="1110";
led<=m1;
end if;
end if;
end process;
end lyt;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity qiduanyimaqi15091 is
port (c:in bit;--控制顯示數字
clk:in std_logic;--時鐘信號
led:out std_logic_vector(7 downto 0);--led燈
led1_4:out std_logic_vector(3 downto 0));--控制七段譯碼管
end qiduanyimaqi15091;
architecture lyt of qiduanyimaqi15091 is
signal clk1:std_logic_vector(15 downto 0);
signal clk2:std_logic_vector(2 downto 0);
signal m0:std_logic_vector(7 downto 0);
signal m1:std_logic_vector(7 downto 0);
signal m2:std_logic_vector(7 downto 0);
signal m3:std_logic_vector(7 downto 0);
signal m4:std_logic_vector(7 downto 0);
signal m5:std_logic_vector(7 downto 0);--保存十個不同數字的信號
signal m6:std_logic_vector(7 downto 0);
signal m7:std_logic_vector(7 downto 0);
signal m8:std_logic_vector(7 downto 0);
signal m9:std_logic_vector(7 downto 0);
begin
process(clk)
begin
if(clk'event and clk='1')then
clk1<=clk1+1;
if(clk1="1111111111111111")then
clk1<=(others=>'0'); ---時鐘控制
if(clk2="111")then
clk2<=(others=>'0');
else
clk2<=clk2+1;
end if;
end if;
m0<="00000010";
m1<="10011111";
m2<="00100101";
m3<="00001101";
m4<="10011001";--儲存十個不同數字
m5<="01001001";
m6<="01000001";
m7<="00011111";
m8<="00000001";
m9<="00001001";
if(clk2="000"and c='0')then
led1_4<="0111";
led<=m2;
end if;
if(clk2="001"and c='0')then
led1_4<="1011";
led<=m0; --賦值
end if;
if(clk2="010"and c='0')then
led1_4<="1101";
led<=m1;
end if;
if(clk2="011"and c='0')then
led1_4<="1110";
led<=m7;
end if;
if(clk2="100"and c='1')then
led1_4<="0111";
led<=m5;
end if;
if(clk2="101"and c='1')then
led1_4<="1011";
led<=m0;
end if;
if(clk2="110"and c='1')then
led1_4<="1101";
led<=m9;
end if;
if(clk2="111"and c='1')then
led1_4<="1110";
led<=m1;
end if;
end if;
end process;
end lyt;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity shiyan3 is
port (K1,K2,K3:in bit;--控制顯示數字
clk:in std_logic;--時鐘信號
led:out std_logic_vector(7 downto 0);--led燈
STAR:out std_logic_vector(7 downto 0);--二極管
led1_4:out std_logic_vector(3 downto 0));--控制七段譯碼管
end shiyan3;
architecture lyt of shiyan3 is
signal clk1:std_logic_vector(15 downto 0);
signal clk2:std_logic_vector(2 downto 0);
signal clk3:std_logic_vector(25 downto 0);
signal clk4:std_logic_vector(3 downto 0);
signal m0:std_logic_vector(7 downto 0);
signal m1:std_logic_vector(7 downto 0);
signal m2:std_logic_vector(7 downto 0);
signal m3:std_logic_vector(7 downto 0);
signal m4:std_logic_vector(7 downto 0);
signal m5:std_logic_vector(7 downto 0);--保存十個不同數字的信號
signal m6:std_logic_vector(7 downto 0);
signal m7:std_logic_vector(7 downto 0);
signal m8:std_logic_vector(7 downto 0);
signal m9:std_logic_vector(7 downto 0);
signal N0:std_logic_vector(7 downto 0);
signal N1:std_logic_vector(7 downto 0);
signal N2:std_logic_vector(7 downto 0);
signal N3:std_logic_vector(7 downto 0);
signal N4:std_logic_vector(7 downto 0);
signal N5:std_logic_vector(7 downto 0);
signal L0:std_logic_vector(7 downto 0);
signal L1:std_logic_vector(7 downto 0);
signal L2:std_logic_vector(7 downto 0);
signal L3:std_logic_vector(7 downto 0);
signal L4:std_logic_vector(7 downto 0);
begin
P1:process(clk,K1)---控制七段顯示學號的進程
begin
if(clk'event and clk='1')then
clk1<=clk1+1;
clk3<=clk3+1;
if(clk1="1111111111111111")then
clk1<=(others=>'0'); ---時鐘控制
if(clk2="011")then
clk2<=(others=>'0');
else
clk2<=clk2+1;
end if;
end if;
if(clk3="10111110101111000010000000")then
clk3<=(others=>'0'); ---時鐘控制
if(clk4="1001")then
clk4<=(others=>'0');
else
clk4<=clk4+1;
end if;
end if;
m0<="00000011";
m1<="10011110";
m2<="00100100";
m3<="00001100";
m4<="10011000";--儲存十個不同led數字
m5<="01001000";
m6<="01000000";
m7<="00011110";
m8<="00000000";
m9<="00001000";
if(clk2="0000"and K1='1')then
led1_4<="0111";
led<=m5;
end if;
if(clk2="0001"and K1='1')then
led1_4<="1011";
led<=m0; --賦值
end if;
if(clk2="0010"and K1='1')then
led1_4<="1101";
led<=m9;
end if;
if(clk2="0011"and K1='1')then
led1_4<="1110";
led<=m1;
end if;
if(K1='0')then
led1_4<="1111";
led<=m1;
end if;
end if;
end process P1;
P2:process(clk4,K1)--控制流水燈模式1的進程
begin
N0<="00011111";
N1<="10001111";
N2<="11000111";
N3<="11100011";
N4<="11110001";--儲存六個第一種二極管信號
N5<="11111000";
if(k1 and k2 and k3)='1' then
star<="11111111" ;
end if;
if(clk4="0000"and ((K1 AND(K2 XOR K3))OR(NOT K1 AND K2 AND K3))='1')then
STAR<=N0;
end if;
if(clk4="0001"and ((K1 AND(K2 XOR K3))OR(NOT K1 AND K2 AND K3))='1')then
STAR<=N1;
end if;
if(clk4="0010"and ((K1 AND(K2 XOR K3))OR(NOT K1 AND K2 AND K3))='1')then
STAR<=N2;
end if;
if(clk4="0011"and ((K1 AND(K2 XOR K3))OR(NOT K1 AND K2 AND K3))='1')then
STAR<=N3;
end if;
if(clk4="0100"and ((K1 AND(K2 XOR K3))OR(NOT K1 AND K2 AND K3))='1')then
STAR<=N4;
end if;
if(clk4="0101"and ((K1 AND(K2 XOR K3))OR(NOT K1 AND K2 AND K3))='1')then
STAR<=N5;
end if;
if(clk4="0110"and ((K1 AND(K2 XOR K3))OR(NOT K1 AND K2 AND K3))='1')then
STAR<=N4;
end if;
if(clk4="0111"and ((K1 AND(K2 XOR K3))OR(NOT K1 AND K2 AND K3))='1')then
STAR<=N3;
end if;
if(clk4="1000"and ((K1 AND(K2 XOR K3))OR(NOT K1 AND K2 AND K3))='1')then
STAR<=N2;
end if;
if(clk4="1001"and ((K1 AND(K2 XOR K3))OR(NOT K1 AND K2 AND K3))='1')then
STAR<=N1;
end if;
end process P2;
---P3:process(clk4,K2)--控制流水燈模式2的進程
--begin
-- L0<="11100111";
-- L1<="11010011";
--L2<="10111101";
-- L3<="01111110";
-- L4<="11111111";--儲存五個第二種二極管信號
-- if(clk4="0000"and K1='0'and k2='0'and k3='1')then
--STAR<=L0;
-- end if;
--if(clk4="0001"and K1='0'and k2='0'and k3='1')then
-- STAR<=L1;
--end if;
--if(clk4="0010"and K1='0'and k2='0'and k3='1')then
--STAR<=L2;
--end if;
-- if(clk4="0011"and K1='0'and k2='0'and k3='1')then
--STAR<=L3;
-- end if;
-- if(clk4="0100"and K1='0'and k2='0'and k3='1')then
-- STAR<=L4;
-- end if;
-- end process P3;
end lytlibrary ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity shiyan3 is
port (K1,K2,K3:in bit;--控制顯示數字
clk:in std_logic;--時鐘信號
led:out std_logic_vector(7 downto 0);--led燈
STAR:out std_logic_vector(7 downto 0);--二極管
led1_4:out std_logic_vector(3 downto 0));--控制七段譯碼管
end shiyan3;
architecture lyt of shiyan3 is
signal clk1:std_logic_vector(15 downto 0);
signal clk2:std_logic_vector(2 downto 0);
signal clk3:std_logic_vector(25 downto 0);
signal clk4:std_logic_vector(3 downto 0);
signal clk5:std_logic_vector(2 downto 0);
signal clk6:std_logic_vector(1 downto 0);
signal A:std_logic_vector(2 downto 0);
signal m0:std_logic_vector(7 downto 0);
signal m1:std_logic_vector(7 downto 0);
signal m2:std_logic_vector(7 downto 0);
signal m3:std_logic_vector(7 downto 0);
signal m4:std_logic_vector(7 downto 0);
signal m5:std_logic_vector(7 downto 0);--保存十個不同數字的信號
signal m6:std_logic_vector(7 downto 0);
signal m7:std_logic_vector(7 downto 0);
signal m8:std_logic_vector(7 downto 0);
signal m9:std_logic_vector(7 downto 0);
signal N0:std_logic_vector(7 downto 0);
signal N1:std_logic_vector(7 downto 0);
signal N2:std_logic_vector(7 downto 0);
signal N3:std_logic_vector(7 downto 0);
signal N4:std_logic_vector(7 downto 0);
signal N5:std_logic_vector(7 downto 0);
signal L0:std_logic_vector(7 downto 0);
signal L1:std_logic_vector(7 downto 0);
signal L2:std_logic_vector(7 downto 0);
signal L3:std_logic_vector(7 downto 0);
signal L4:std_logic_vector(7 downto 0);
signal T0:std_logic_vector(7 downto 0);
signal T1:std_logic_vector(7 downto 0);
begin
P1:process(clk,K1)---控制七段顯示學號的進程
begin
if(clk'event and clk='1')then
clk1<=clk1+1;
clk3<=clk3+1;
if(clk1="1111111111111111")then
clk1<=(others=>'0'); ---時鐘控制
if(clk2="011")then
clk2<=(others=>'0');
else
clk2<=clk2+1;
end if;
end if;
if(clk3="10111110101111000010000000")then
clk3<=(others=>'0'); ---時鐘控制
if(clk4="1010")then
clk4<=(others=>'0');
else
clk4<=clk4+1;
end if;
if(clk5="100")then
clk5<=(others=>'0');
else
clk5<=clk5+1;
end if;
if(clk6="01")then
clk6<=(others=>'0');
else
clk6<=clk6+1;
end if;
end if;
m0<="00000011";
m1<="10011110";
m2<="00100100";
m3<="00001100";
m4<="10011000";--儲存十個不同led數字
m5<="01001000";
m6<="01000000";
m7<="00011110";
m8<="00000000";
m9<="00001000";
if(clk2="0000"and K1='1')then
led1_4<="0111";
led<=m5;
end if;
if(clk2="0001"and K1='1')then
led1_4<="1011";
led<=m0; --賦值
end if;
if(clk2="0010"and K1='1')then
led1_4<="1101";
led<=m9;
end if;
if(clk2="0011"and K1='1')then
led1_4<="1110";
led<=m1;
end if;
if(K1='0')then
led1_4<="1111";
led<=m1;
end if;
end if;
end process P1;
P2:process(clk4,K1)--控制流水燈的進程
begin N0<="00011111";
N1<="10001111";
N2<="11000111";
N3<="11100011";
N4<="11110001";--儲存六個第一模式二極管信號
N5<="11111000";
L0<="11100111";
L1<="11011011";
L2<="10111101";
L3<="01111110";
L4<="11111111";--儲存五個第二模式二極管信號
T0<="01010101";
T1<="10101010";--儲存二個第三模式二極管信號
if(k1 and k2 and k3)='1' then
star<="11111111" ;
- end if;
if(clk4="0001"and K1='0'AND K2='1'AND K3='1')then
STAR<=N0;
end if;
if(clk4="0010"and K1='0'AND K2='1'AND K3='1')then
STAR<=N1;
end if;
if(clk4="0011"and K1='0'AND K2='1'AND K3='1')then
STAR<=N2;
end if;
if(clk4="0100"and K1='0'AND K2='1'AND K3='1')then
STAR<=N3;
end if;
if(clk4="0101"and K1='0'AND K2='1'AND K3='1')then
STAR<=N4;
end if;
if(clk4="0110"and K1='0'AND K2='1'AND K3='1')then
STAR<=N5;
end if;
if(clk4="0111"and K1='0'AND K2='1'AND K3='1')then
STAR<=N4;
end if;
if(clk4="1000"and K1='0'AND K2='1'AND K3='1')then
STAR<=N3;
end if;
if(clk4="1001"and K1='0'AND K2='1'AND K3='1')then
STAR<=N2;
end if;
if(clk4="1010"and K1='0'AND K2='1'AND K3='1')then
STAR<=N1;
end if;
if(clk5="000"and K1='0'and k2='0'and k3='1')then
STAR<=L0;
end if;
if(clk5="001"and K1='0'and k2='0'and k3='1')then
STAR<=L1;
end if;
if(clk5="010"and K1='0'and k2='0'and k3='1')then
STAR<=L2;
end if;
if(clk5="011"and K1='0'and k2='0'and k3='1')then
STAR<=L3;
end if;
if(clk5="100"and K1='0'and k2='0'and k3='1')then
STAR<=L4;
end if;
if(clk6="00"and K1='0'and k2='1'and k3='0')then
STAR<=T0;
end if;
if(clk6="01"and K1='0'and k2='1'and k3='0')then
STAR<=T1;
end if;
end process P2;
end lyt;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity shiyan3 is
port ( A:in BIT_VECTOR(1 TO 3);--控制顯示數字
clk:in std_logic;--時鐘信號
led:out std_logic_vector(7 downto 0);--led燈
STAR:out std_logic_vector(7 downto 0);--二極管
led1_4:out std_logic_vector(3 downto 0));--控制七段譯碼管
end shiyan3;
architecture lyt of shiyan3 is
signal clk1:std_logic_vector(15 downto 0);
signal clk2:std_logic_vector(2 downto 0);
signal clk3:std_logic_vector(25 downto 0);
signal clk4:std_logic_vector(3 downto 0);
signal clk5:std_logic_vector(2 downto 0);
signal clk6:std_logic_vector(1 downto 0);
signal m0:std_logic_vector(7 downto 0);
signal m1:std_logic_vector(7 downto 0);
signal m2:std_logic_vector(7 downto 0);
signal m3:std_logic_vector(7 downto 0);
signal m4:std_logic_vector(7 downto 0);
signal m5:std_logic_vector(7 downto 0);--保存十個不同數字的信號
signal m6:std_logic_vector(7 downto 0);
signal m7:std_logic_vector(7 downto 0);
signal m8:std_logic_vector(7 downto 0);
signal m9:std_logic_vector(7 downto 0);
signal N0:std_logic_vector(7 downto 0);
signal N1:std_logic_vector(7 downto 0);
signal N2:std_logic_vector(7 downto 0);
signal N3:std_logic_vector(7 downto 0);
signal N4:std_logic_vector(7 downto 0);
signal N5:std_logic_vector(7 downto 0);
signal L0:std_logic_vector(7 downto 0);
signal L1:std_logic_vector(7 downto 0);
signal L2:std_logic_vector(7 downto 0);
signal L3:std_logic_vector(7 downto 0);
signal L4:std_logic_vector(7 downto 0);
signal T0:std_logic_vector(7 downto 0);
signal T1:std_logic_vector(7 downto 0);
begin
P1:process(clk)---控制七段顯示學號的進程
begin
if(clk'event and clk='1')then
clk1<=clk1+1;
clk3<=clk3+1;
if(clk1="1111111111111111")then
clk1<=(others=>'0'); ---時鐘控制
if(clk2="011")then
clk2<=(others=>'0');
else
clk2<=clk2+1;
end if;
end if;
if(clk3="10111110101111000010000000")then
clk3<=(others=>'0'); ---時鐘控制
if(clk4="1010")then
clk4<="0000";
else
clk4<=clk4+1;
end if;
if(clk5="100")then
clk5<=(others=>'0');
else
clk5<=clk5+1;
end if;
if(clk6="01")then
clk6<=(others=>'0');
else
clk6<=clk6+1;
end if;
end if;
m0<="00000011";
m1<="10011110";
m2<="00100100";
m3<="00001100";
m4<="10011000";--儲存十個不同led數字
m5<="01001000";
m6<="01000000";
m7<="00011110";
m8<="00000000";
m9<="00001000";
if(clk2="0000"and A(1)='1')then
led1_4<="0111";
led<=m5;
end if;
if(clk2="0001"and A(1)='1')then
led1_4<="1011";
led<=m0; --賦值
end if;
if(clk2="0010"and A(1)='1')then
led1_4<="1101";
led<=m9;
end if;
if(clk2="0011"and A(1)='1')then
led1_4<="1110";
led<=m1;
end if;
if(A(1)='0')then
led1_4<="1111";
led<=m1;
end if;
end if;
end process P1;
P2:process(clk4,CLK5,CLK6)--控制流水燈的進程
begin
N0<="00011111";
N1<="10001111";
N2<="11000111";
N3<="11100011";
N4<="11110001";--儲存六個第一模式二極管信號
N5<="11111000";
L0<="11100111";
L1<="11011011";
L2<="10111101";
L3<="01111110";
L4<="11111111";--儲存五個第二模式二極管信號
T0<="01010101";
T1<="10101010";--儲存二個第三模式二極管信號
if A="111" then
star<="11111111" ;
end if;
if(clk4="0001"and A="011")then
STAR<=N0;
end if;
if(clk4="0010"and A="011")then
STAR<=N1;
end if;
if(clk4="0011"and A="011")then
STAR<=N2;
end if;
if(clk4="0100"and A="011")then
STAR<=N3;
end if;
if(clk4="0101"and A="011")then
STAR<=N4;
end if;
if(clk4="0110"and A="011")then
STAR<=N5;
end if;
if(clk4="0111"and A="011")then
STAR<=N4;
end if;
if(clk4="1000"and A="011")then
STAR<=N3;
end if;
if(clk4="1001"and A="011")then
STAR<=N2;
end if;
if(clk4="1010"and A="011")then
STAR<=N1;
end if;
if(clk5="001"and A="001")then
STAR<=L0;
end if;
if(clk5="010"and A="001")then
STAR<=L1;
end if;
if(clk5="011"and A="001")then
STAR<=L2;
end if;
if(clk5="100"and A="001")then
STAR<=L3;
end if;
if(clk5="101"and A="001")then
STAR<=L4;
end if;
if(clk6="00"and A="010")then
STAR<=T0;
end if;
if(clk6="01"and A="010")then
STAR<=T1;
end if;
end process P2;
end lyt;
最完美代碼
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity shiyan5 is
port ( A:in BIT_VECTOR(1 TO 3);--控制顯示數字
clk:in std_logic;--時鐘信號
led:out std_logic_vector(7 downto 0);--led燈
STAR:out std_logic_vector(7 downto 0);--二極管
led1_4:out std_logic_vector(3 downto 0));--控制七段譯碼管
end shiyan5;
architecture lyt of shiyan5 is
signal clk1:std_logic_vector(15 downto 0);
signal clk2:std_logic_vector(2 downto 0);
signal clk3:std_logic_vector(25 downto 0);
signal clk4:std_logic_vector(3 downto 0);
signal clk5:std_logic_vector(2 downto 0);
signal clk6:std_logic_vector(1 downto 0);
signal m0:std_logic_vector(7 downto 0);
signal m1:std_logic_vector(7 downto 0);
signal m2:std_logic_vector(7 downto 0);
signal m3:std_logic_vector(7 downto 0);
signal m4:std_logic_vector(7 downto 0);
signal m5:std_logic_vector(7 downto 0);--保存十個不同數字的信號
signal m6:std_logic_vector(7 downto 0);
signal m7:std_logic_vector(7 downto 0);
signal m8:std_logic_vector(7 downto 0);
signal m9:std_logic_vector(7 downto 0);
signal N0:std_logic_vector(7 downto 0);
signal N1:std_logic_vector(7 downto 0);
signal N2:std_logic_vector(7 downto 0);
signal N3:std_logic_vector(7 downto 0);
signal N4:std_logic_vector(7 downto 0);
signal N5:std_logic_vector(7 downto 0);
signal L0:std_logic_vector(7 downto 0);
signal L1:std_logic_vector(7 downto 0);
signal L2:std_logic_vector(7 downto 0);
signal L3:std_logic_vector(7 downto 0);
signal L4:std_logic_vector(7 downto 0);
signal T0:std_logic_vector(7 downto 0);
signal T1:std_logic_vector(7 downto 0);
begin
P1:process(clk)---控制七段顯示學號的進程
begin
if(clk'event and clk='1')then
clk1<=clk1+1;
clk3<=clk3+1;
if(clk1="1111111111111111")then
clk1<=(others=>'0'); ---時鐘控制
if(clk2="011")then
clk2<=(others=>'0');
else
clk2<=clk2+1;
end if;
end if;
if(clk3="10111110101111000010000000")then
clk3<=(others=>'0'); ---時鐘控制
if(clk4="1010"and A="011")then
clk4<="0001";
elsif(A(1)='1') then
clk4<="0000";
else
clk4<=clk4+1;
end if;
if(clk5="101"and A="001")then
clk5<="001";
elsif(A(2)='1') THEN clk5<="000";
ELSE CLK5<=CLK5+1;
end if;
if(clk6="10"and A="010")then
clk6<="01";
elsif(A(3)='1') THEN clk6<="00";
ELSE CLK6<=CLK6+1;
end if;
end if;
m0<="00000011";
m1<="10011110";
m2<="00100100";
m3<="00001100";
m4<="10011000";--儲存十個不同led數字
m5<="01001000";
m6<="01000000";
m7<="00011110";
m8<="00000000";
m9<="00001000";
if(clk2="0000"and A(1)='1')then
led1_4<="0111";
led<=m5;
elsif(clk2="0001"and A(1)='1')then
led1_4<="1011";
led<=m0; --賦值
elsif(clk2="0010"and A(1)='1')then
led1_4<="1101";
led<=m9;
elsif(clk2="0011"and A(1)='1')then
led1_4<="1110";
led<=m1;
else led1_4<="1111";
end if;
if(A(1)='0')then
led1_4<="1111";
end if;
end if;
end process P1;
P2:process(clk4,CLK5,CLK6)--控制流水燈的進程
begin
N0<="00011111";
N1<="10001111";
N2<="11000111";
N3<="11100011";
N4<="11110001";--儲存六個第一模式二極管信號
N5<="11111000";
L0<="11100111";
L1<="11011011";
L2<="10111101";
L3<="01111110";
L4<="11111111";--儲存五個第二模式二極管信號
T0<="01010101";
T1<="10101010";--儲存二個第三模式二極管信號
if A="111" then
star<="11111111" ;
end if;
if(clk4="0001"and A="011")then
STAR<=N0;
elsif(clk4="0010"and A="011")then
STAR<=N1;
elsif(clk4="0011"and A="011")then
STAR<=N2;
elsif(clk4="0100"and A="011")then
STAR<=N3;
elsif(clk4="0101"and A="011")then
STAR<=N4;
elsif(clk4="0110"and A="011")then
STAR<=N5;
elsif(clk4="0111"and A="011")then
STAR<=N4;
elsif(clk4="1000"and A="011")then
STAR<=N3;
elsif(clk4="1001"and A="011")then
STAR<=N2;
elsif(clk4="1010"and A="011")then
STAR<=N1;
elsif(clk5="001"and A="001")then
STAR<=L0;
elsif(clk5="010"and A="001")then
STAR<=L1;
elsif(clk5="011"and A="001")then
STAR<=L2;
elsif(clk5="100"and A="001")then
STAR<=L3;
elsif(clk5="101"and A="001")then
STAR<=L4;
elsif(clk6="01"and A="010")then
STAR<=T0;
elsif(clk6="10"and A="010")then
STAR<=T1;
else star<="11111111" ;
end if;
end process P2;
end lyt;
失敗的時鐘
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity shizhong5091 is
port ( clk:in std_logic;--時鐘信號
led:out std_logic_vector(7 downto 0);--led燈
led1_4:out std_logic_vector(3 downto 0));--控制七段譯碼管
end shizhong5091;
architecture lyt of shizhong5091 is
signal clk1:std_logic_vector(25 downto 0);
signal clk2:std_logic_vector(5 downto 0);
signal clk3:std_logic_vector(3 downto 0);
signal clk4:std_logic_vector(2 downto 0);
signal clk5:std_logic_vector(3 downto 0);
signal clk6:std_logic_vector(1 downto 0);
signal A:std_logic_vector(2 downto 0);
signal m0:std_logic_vector(7 downto 0);
signal m1:std_logic_vector(7 downto 0);
signal m2:std_logic_vector(7 downto 0);
signal m3:std_logic_vector(7 downto 0);
signal m4:std_logic_vector(7 downto 0);
signal m5:std_logic_vector(7 downto 0);--保存十個不同數字的信號
signal m6:std_logic_vector(7 downto 0);
signal m7:std_logic_vector(7 downto 0);
signal m8:std_logic_vector(7 downto 0);
signal m9:std_logic_vector(7 downto 0);
begin
P1:process(clk)---控制七段顯示學號的進程
begin
if(clk'event and clk='1')then
clk1<=clk1+1;
if(clk1="10111110101111000010000000")then
clk1<=(others=>'0'); ---時鐘控制
if(clk3="1001")then
clk3<=(others=>'0');
if(clk4="100")then
clk4<=(others=>'0');
if(clk5="1011")then
clk5<=(others=>'0');
if(clk6="01")then
clk6<=(others=>'0');
else clk6<=clk6+1;
end if;
else clk5<=clk5+1;
end if;
else clk4<=clk4+1;
end if;
else clk3<=clk3+1;
end if;
end if;
m0<="00000011";
m1<="10011110";
m2<="00100100";
m3<="00001100";
m4<="10011000";--儲存十個不同led數字
m5<="01001000";
m6<="01000000";
m7<="00011110";
m8<="00000000";
m9<="00001000";
if(clk3="0000")then
led1_4<="1110";
led<=m0;
end if ;
if(clk3="0001")then
led1_4<="1110";
led<=m1;
end if ;
if(clk3="0010")then
led1_4<="1110";
led<=m2;
end if ;
if(clk3="0011")then
led1_4<="1110";
led<=m3;
end if ;
if(clk3="0100")then
led1_4<="1110";
led<=m4;
end if ;
if(clk3="0101")then
led1_4<="1110";
led<=m5;
end if ;
if(clk3="0110")then
led1_4<="1110";
led<=m6;
end if ;
if(clk3="0111")then
led1_4<="1110";
led<=m7;
end if ;
if(clk3="1000")then
led1_4<="1110";
led<=m8;
end if ;
if(clk3="1001")then
led1_4<="1110";
led<=m9;
end if ;
if(clk4="000")then
led1_4<="1101";
led<=m0;
end if ;
if(clk4="001")then
led1_4<="1110";
led<=m1;
end if ;
if(clk4="010")then
led1_4<="1101";
led<=m2;
end if ;
if(clk4="011")then
led1_4<="1101";
led<=m3;
end if ;
if(clk4="100")then
led1_4<="1101";
led<=m4;
end if ;
if(clk4="101")then
led1_4<="1101";
led<=m5;
end if ;
if(clk5="0000")then
led1_4<="1011";
led<=m0;
end if ;
if(clk5="0001")then
led1_4<="1011";
led<=m1;
end if ;
if(clk5="0010")then
led1_4<="1011";
led<=m2;
end if ;
if(clk3="0011")then
led1_4<="1011";
led<=m3;
end if ;
if(clk5="0100")then
led1_4<="1011";
led<=m4;
end if ;
if(clk5="0101")then
led1_4<="1011";
led<=m5;
end if ;
if(clk5="0110")then
led1_4<="1011";
led<=m6;
end if ;
if(clk5="0111")then
led1_4<="1011";
led<=m7;
end if ;
if(clk5="1000")then
led1_4<="1011";
led<=m8;
end if ;
if(clk5="1001")then
led1_4<="1011";
led<=m9;
end if ;
if(clk5="1010")then
led1_4<="1011";
led<=m0;
end if ;
if(clk5="1011")then
led1_4<="1011";
led<=m1;
end if ;
if(clk6="00")then
led1_4<="0111";
led<=m0;
end if ;
if(clk6="01")then
led1_4<="0111";
led<=m1;
end if ;
end if;
end process P1;
end lyt;

復制代碼

久久久久久久999_99精品久久精品一区二区爱城_成人欧美一区二区三区在线播放_国产精品日本一区二区不卡视频_国产午夜视频_欧美精品在线观看免费