久久久久久久999_99精品久久精品一区二区爱城_成人欧美一区二区三区在线播放_国产精品日本一区二区不卡视频_国产午夜视频_欧美精品在线观看免费

<input id="smgou"></input>

標題: 51單片機 LCD1602液晶顯示溫度+Proteus原理圖 [打印本頁]

作者: 想想，還是想想 時間: 2019-6-10 23:03
標題: 51單片機 LCD1602液晶顯示溫度+Proteus原理圖
#include <reg52.H>
#include <intrins.H>
#include <math.H>

#define uchar unsigned char
#define uint unsigned int

sbit rw = P3^6;
sbit RS = P3^5;
sbit LCDEN = P3^4;
sbit ds = P1^0; //溫度IO口定義
void delayUs()
{
_nop_();
}

void delayMs(uint a)
{
uint i, j;
for(i = a; i > 0; i--)
      for(j = 100; j > 0; j--);
}

void writeComm(uchar comm)
{
   RS = 0;
   P2 = comm;    //將要寫的命令送到數據總線
   LCDEN = 1; //使能
   delayUs();
   LCDEN = 0;
   delayMs(1);
}

//寫數據:RS=1, RW=0;
void writeData(uchar dat)
{
   RS = 1;
   P2 = dat;
   LCDEN = 1;
   delayUs();
   LCDEN = 0;
   delayMs(1);
}

void init()
{
   rw = 0;
   writeComm(0x38);
   writeComm(0x0c);
   writeComm(0x06);
   writeComm(0x01);
}

void writeString(uchar * str, uchar length)
{
   uchar i;
for(i = 0; i < length; i++)
{
      writeData(str[i]);
   }
}

/**//*****************************DS18B20*******************************/

void dsInit()    //復位DS18B20初始化函數
{

unsigned int i;
ds = 0;
i = 100;
   while(i>0) i--;
ds = 1;
i = 4;
   while(i>0) i--;
}

void dsWait()
{
   unsigned int i;
   while(ds);
   while(~ds);
   i = 4;
   while(i > 0) i--;
}

bit readBit()
{
unsigned int i;
bit b;
ds = 0;
i++;
ds = 1;
i++; i++;
b = ds;
i = 8;
while(i>0) i--;
return b;
}

unsigned char readByte()
{
unsigned int i;
unsigned char j, dat;
dat = 0;
for(i=0; i<8; i++)
{
      j = readBit();

      dat = (j << 7) | (dat >> 1);
}
return dat;
}

void writeByte(unsigned char dat) //向DS18B20寫一個字節的函數
{
unsigned int i;
unsigned char j;
bit b;
for(j = 0; j < 8; j++)
{
      b = dat & 0x01;
      dat >>= 1;

      if(b)          //寫1
      {
         ds = 0;       i++; i++;
         ds = 1;
         i = 8; while(i>0) i--;
      }
      else
      {
         ds = 0;         //寫0
      i = 8; while(i>0) i--;
         ds = 1;
         i++; i++;
      }
}
}

void sendChangeCmd() //DS18B20開始獲取溫度并轉換
{
dsInit();
dsWait();
delayMs(1);
writeByte(0xcc);
writeByte(0x44);
}

void sendReadCmd()
{
dsInit();
dsWait();
delayMs(1);
writeByte(0xcc);
writeByte(0xbe);
}

int getTmpValue()       //讀取寄存器中的溫度數據
{
unsigned int tmpvalue;
int value;
float t;
unsigned char low, high;
sendReadCmd();

low = readByte();    //讀低8位
high = readByte();    //讀高8位
tmpvalue = high;
tmpvalue <<= 8;    //兩個字節組合為一個字節
tmpvalue |= low;

value = tmpvalue;
t = value * 0.0625;
value = t * 100 + (value > 0 ? 0.5 : -0.5); //大于0加0.5, 小于0減0.5

return value;
}

void display(int v) //顯示溫度值函數
{
unsigned char count;
unsigned char datas[] = {0, 0, 0, 0, 0};
unsigned int tmp = abs(v);
datas[0] = tmp / 10000;
datas[1] = tmp % 10000 / 1000;
datas[2] = tmp % 1000 / 100;
datas[3] = tmp % 100 / 10;
datas[4] = tmp % 10;
writeComm(0xc0+3);
if(v < 0)
{
      writeString("- ", 2);
}
else
{
   writeString("+ ", 2);
}
if(datas[0] != 0)
{
      writeData('0'+datas[0]);
}
for(count = 1; count != 5; count++)
{
      writeData('0'+datas[count]);
      if(count == 2)
      {
         writeData('.');
      }
}
}
/**//*****************************DS18B20*******************************/

void main()
{
uchar table[] = "  xianzaiwendu: ";
sendChangeCmd();
init();
writeComm(0x80);
writeString(table, 16);
while(1)
{
      delayMs(1000); //溫度轉換時間需要750ms以上
      writeComm(0xc0);
      display(getTmpValue());
      sendChangeCmd();
}
}

P$)Z%7K6Z3C(NBBULJ(O0)X.png (47.38 KB, 下載次數: 58)

1602液晶顯示溫度.zip

71.08 KB, 下載次數: 57, 下載積分: 黑幣 -5

作者: Conrong 時間: 2020-2-25 10:50
為什么按照這個代碼可以正常編譯，仿真圖顯示屏沒有顯示？

作者: cyhlife001 時間: 2020-2-25 11:38
好東西

歡迎光臨 (http://www.zg4o1577.cn/bbs/)