美女久久精品,成人黄色在线观看,日韩国产

#include<reg51.H>
#include<intrins.h>
#include<stdio.h>
#define uintunsigned int
#define ucharunsigned char
/**********************定義全局變量***************/
//unsigned chardat=0x00 ; //AD值
unsigned charcount = 0x00; //定時器計數
unsigned charchannel; //通道變量
//ADC0832的引腳
sbit ADCS=P1^2; //ADC0832 chip seclect
sbit ADDI=P1^1; //ADC0832 k in
sbit ADDO=P1^1; //ADC0832 k out
sbit ADCLK=P1^0; //ADC0832 clock signal
unsigned chardispbuf[3];
uint temp;
uint alc;//酒精濃度
uchar dat; //獲取ADC轉換回來的值
uchar*aa="M=T.TTmg/L";
uchar*cc="alarm";
uchar *dd="";
uint sheding=60;
ucharbb[16]={'A','l','c','o','h','o','l','=',' ','.',' ',' ','m','g','/','L'};
sbit RS =P2^0; //定義端口
sbit RW = P2^1;
sbit EN = P2^2;
sbit beep=P3^7;
sbit k1=P1^3;//+鍵
sbit k2=P1^4;//-鍵
#define RS_CLRRS=0
#define RS_SETRS=1
#define RW_CLRRW=0
#define RW_SETRW=1
#define EN_CLREN=0
#define EN_SETEN=1
voidDelayUs2x(unsigned char t);
voidDelayMs(unsigned char t);
voidLCD_Write_String(unsigned char x,unsigned char y,unsigned char *s);
voidLCD_Write_Char(unsigned char x,unsigned char y,unsigned char Data);
void init();
voidwrite_com(unsigned char com);
voidwrite_data(unsigned char date);
voidDelayUs2x(unsigned char t)
{
while(--t);
}
voidDelayMs(unsigned char t)
{
while(t--)
{
//大致延時1mS
DelayUs2x(245);
DelayUs2x(245);
}
}
/*********************************lcd1602各子函數**************************************/
voidwrite_com(unsigned char com) //寫命令
{
RS_CLR;
RW_CLR;
P0=com;
DelayMs(5);
EN_SET;
DelayMs(5);
EN_CLR;
}
voidwrite_data(unsigned char date) //寫一個字符
{
RS_SET;
RW_CLR;
P0=date;
DelayMs(5);
EN_SET;
DelayMs(5);
EN_CLR;
}
void initlcd() //初始化
{
write_com(0x38);
write_com(0x0c);
write_com(0x06);
write_com(0x01);
}
/*------------------------------------------------
寫入字符串函數
------------------------------------------------*/
void LCD_Write_String(unsigned char x,unsignedchar y,unsigned char *s)
{
if (y == 0)
{
write_com(0x80 + x);
}
else
{
write_com(0xC0+ x);
}
while (*s)
{
write_data( *s);
s ++;
}
}
/*------------------------------------------------
寫入字符函數
------------------------------------------------*/
void LCD_Write_Char(unsigned char x,unsignedchar y,unsigned char Data)
{
if (y == 0)
{
write_com(0x80+ x);
}
else
{
write_com(0xC0+ x);
}
write_data(Data);
}
/****************************************************************************
函數功能:AD轉換子程序
入口參數:CH
出口參數:dat
****************************************************************************/
//采集并返回
unsigned charAdc0832(unsigned char channel) //AD轉換，返回結果
{
uchar i=0;
uchar j;
uchar dat=0;
uchar ndat=0;
if(channel==0)channel=2;
if(channel==1)channel=3;
ADDI=1;
_nop_();
_nop_();
ADCS=0;//拉低CS端
_nop_();
_nop_();
ADCLK=1;//拉高CLK端
_nop_();
_nop_();
ADCLK=0;//拉低CLK端,形成下降沿1
_nop_();
_nop_();
ADCLK=1;//拉高CLK端
ADDI=channel&0x1;
_nop_();
_nop_();
ADCLK=0;//拉低CLK端,形成下降沿2
_nop_();
_nop_();
ADCLK=1;//拉高CLK端
ADDI=(channel>>1)&0x1;
_nop_();
_nop_();
ADCLK=0;//拉低CLK端,形成下降沿3
ADDI=1;//控制命令結束
_nop_();
_nop_();
dat=0;
for(i=0;i<8;i++)
{
dat|=ADDO;//收數據
ADCLK=1;
_nop_();
_nop_();
ADCLK=0;//形成一次時鐘脈沖
_nop_();
_nop_();
dat<<=1;
if(i==7)dat|=ADDO;
}
for(i=0;i<8;i++)
{
j=0;
j=j|ADDO;//收數據
ADCLK=1;
_nop_();
_nop_();
ADCLK=0;//形成一次時鐘脈沖
_nop_();
_nop_();
j=j<<7;
ndat=ndat|j;
if(i<7)ndat>>=1;
}
ADCS=1;//拉低CS端
ADCLK=0;//拉低CLK端
ADDO=1;//拉高數據端,回到初始狀態
dat<<=8;
dat|=ndat;
return(dat);//returnad k
}
/****************************************************************************
函數功能:定時器中斷延時程序這一段的作用時隔一段時間抽樣一次否側顯示的最后一位會不穩定
入口參數:
出口參數:
****************************************************************************/
voidtimer0(void) interrupt 1
{
TMOD = 0x01;
TH0 = 0x00;
TL0 = 0x00;
IE = 0x82;
TR0 = 01;
count++;
if (count == 0x0A)
{
count = 0x00;
dat= Adc0832(channel);
}
}
/*voidformat_data(uint dat)
{
uint change_dat=dat;
uchar ptr[3];
change_dat=(change_dat<<8)+(change_dat<<7)+(change_dat<<6)+(change_dat<<5)+(change_dat<<4)+(change_dat<<2);//乘500
change_dat=change_dat>>8;//除以256
ptr[0]=change_dat/100; //得到個位數字
ptr[1]=(change_dat-(100*ptr[0]))/10; //得到十分位數字
ptr[2]=change_dat-(100*ptr[0])-(10*ptr[1]);//得到百分位數字
}*/
void keyscan()
{
if(!k1)
{
DelayMs(5);
if(!k1)
{
while(!k1);
sheding+=5;
LCD_Write_Char(2,1,sheding/100+'0');
LCD_Write_Char(4,1,sheding%100/10+'0');
LCD_Write_Char(5,1,sheding%10+'0');
}
}
if(!k2)
{
DelayMs(5);
if(!k2)
{
while(!k2);
sheding-=5;
LCD_Write_Char(2,1,sheding/100+'0');
LCD_Write_Char(4,1,sheding%100/10+'0');
LCD_Write_Char(5,1,sheding%10+'0');
}
}
}
/****************************************
函數功能:主程序
入口參數:
出口參數:
****************************************/
void main(void)
{
uchar i;
P2=0xff; //端口初始化
P0=0xff;
P3=0xff;
channel=0x00; //channel=0
TMOD = 0x01;
TH0 = 0x00;
TL0 = 0x00;
IE = 0x82;
TR0 = 01;
initlcd();
LCD_Write_String(0,0,bb);
LCD_Write_String(0,1,aa);
//LCD_Write_String(11,1,cc);
LCD_Write_Char(2,1,sheding/100+'0');
LCD_Write_Char(4,1,sheding%100/10+'0');
LCD_Write_Char(5,1,sheding%10+'0');
while(1)
{
temp=dat*1.0/255*500; //電壓值轉換，5V做為參考電壓，分成256份。
if(temp<187)
{
alc=100*(temp-8)/895;
}
else
{
alc=100*(temp-133)/272;
}
dispbuf[0]=alc%10+'0'; //個位
dispbuf[1]=alc/10%10+'0'; //十位
dispbuf[2]=alc/100%10+'0'; //百位
//dispbuf[0]=temp%10+'0'; //個位
//dispbuf[1]=temp/10%10+'0'; //十位
//dispbuf[2]=temp/100%10+'0'; //百位
LCD_Write_Char(8,0,dispbuf[2]);
LCD_Write_Char(10,0,dispbuf[1]);
LCD_Write_Char(11,0,dispbuf[0]);
keyscan();
if(alc>sheding)
{
//beep=0;
for(i=0;i<10;i--)
{
beep=0;
DelayMs(1);
beep=1;
}
LCD_Write_String(11,1,cc);
}
else
{
LCD_Write_String(11,1,dd);
}
}
}

復制代碼

久久久久久久999_99精品久久精品一区二区爱城_成人欧美一区二区三区在线播放_国产精品日本一区二区不卡视频_国产午夜视频_欧美精品在线观看免费