久久久久久久999_99精品久久精品一区二区爱城_成人欧美一区二区三区在线播放_国产精品日本一区二区不卡视频_国产午夜视频_欧美精品在线观看免费

<rt id="2gk2s"></rt>

<rt id="2gk2s"></rt>

標題: warning C318: can't open file 'AT24C02.h'單片機編譯錯誤 [打印本頁]

作者: lll1472589 時間: 2020-6-19 12:24
標題: warning C318: can't open file 'AT24C02.h'單片機編譯錯誤
報錯warning C318: can't open file 'AT24C02.h'

這是源程序：
#include<reg51.h>
#include<at24c02.h>
#define uchar unsigned char
#define uint unsigned int
uchar buffer[6]={0};
sbit sda=P3^5;
sbit sc1=P3^4;
sbit beep=P3^7;
bit flag=0, aa, keyflag=1;
uchar DSY_BUFFER[16]=" ";
uchar Userpassword[6]={0};
sbit rs=P0^0;
sbit rd=P0^1;
sbit lcden=P0^2;
sbit led=P3^6;
uchar code table[]="Your Password...";
void delayms(uint z)
{unit x, y;
for(x=z;x>0; x--)
      for(y=120;y>0; y--);
}
uchar Keys_Scan()
{
      uchar temp,keynum;
      P1=0x0F;
      delayms(3);
      temp=P1^0x0f;
      switch(temp)
      {case 1:keynum=0;break;
      case 2:keynum=1;break;
      case 4:keynum=2;break;
      case 8:keynum=3;break;
      break;}
      P1=0xf0;
      delayms(3) ;
      temp=(P1>>4)^0x0f;
      switch(temp)
      {case 1:keynum=keynum+0;break;
      case 4:keynum=keynum+8;break;
      case 8:keynum=keynum+12;break;
      break;}
      return keynum;}
#include "reg51.h"
unsigned charuint8;
unsigned shortuintl6;
#define AT24C02_WriteDeviceAddress 0xa0
#define AT24C02_ReadDeviceAddress 0xa1
sbit SCL=P3^6;
sbit SDA=P3^7;
#define TRUE 1
#define FALSE 0
#define I2C_DelayTime 60
uint8 co[6];
uint8 cp[6];
void I2C_Delay(uint16 count)
{while(count!=0)count--;
}
void init()
{
      SDA=1;
      I2C_De1ay I2C_DelayTime);SCL=1;
      I2C_De1ay (I2C_DelayTime);
}
void I2C_Start(void)
{
      SDA=1;
      SCL=l;
      I2C_Delay(I2C_DelayTime) ;
      SDA=O;
      I2C_De1ay(I2C_DelayTime);
      SCL=O;
      I2C_Delay(I2C_DelayTime) ;
}
void I2C_Stop(void)
{
      SDA=0;
      SCL=1;
      I2C_Delay(I2C_DelayTime) ;
      SDA=1;
      I2C_Delay (I2C_DelayTime);
      SCL=O;
      I2C_De1ay (I2C_DelayTime);
}
bit I2C_Check_Ack(void)
{
      SDA=1;
      SCL=1;
      I2C_De1ay(I2C_DelayTime/2) ;
      F0=SDA;
      I2C_De1ay(I2C_DelayTime/2) ;
      SCL=O;
      I2C_Delay(I2C_DelayTime) ;
      if(F0==1) return0;
      return1;}
uint8 I2C_Read8Bit(void)reentrant
{
      uint8 I2C_data=0,i;
      for(i=0;i<8;i++);
            {SDA=1;
            SCL=l;
            I2C_Delay(10);
            F0=SDA;
            I2C_Delay(10);
            SCL=0;
            if(F0==1)
                     {I2C_data=I2C_dataK<<1;
                              I2C_data=I2C_data/0x01; }
   Else I2C_data=I2C_data<<1; }
return I2C_data;}
void AT24C02_WritelByte(uint8 AT24C02_Address,uint8 AT24C02_1Byte)
{
      bit AckTemp=1;
      I2C_Start( );
      I2C_Write8Bit(AT24C02_WriteDeviceAddress) ;
      AckTemp=I2C_Check_Ack( );
      I2C_Write8Bit (AT24C02_Address) ;
      AckTemp=I2C_Check_Ack();
      I2C_Write8Bit (AT24C02_1Byte) ;
      AckTemp=I2C_Check_Ack() ;
      I2C_Stop0);}
uint8 AT24C02_Read1Byte (uint8 AT24C02_Address)

      {bitckTemp=l;
      uint8 AT24C02_1Byte;
      I2C_Start();
      I2C_Write8Bit(AT24C02_WriteDeviceAddress) ;
      AckTemp=I2C_Check_Ack();
      I2C_Write8Bit(AT24C02_Address) ;
      AckTemp=I2C_Check_Ack() ;
      I2C_Start();
      I2C_Write8Bit(AT24C02_ReadDeviceAddress) ;
      AckTemp=I2C_Check_Ack();
      AT24C02_1Byte=I2C_Read8Bit() ;
      AckTemp=I2C_Check_Ack() ;
      I2C_Stop() ;
      return AT24C02_1Byte;}
有報錯圖，但是網上的解決方法我都有點看不懂，希望大神們教教小子。謝謝謝謝，講得通俗一點

5.PNG (11.19 KB, 下載次數: 84)

這是運行報錯圖

作者: SKYLAR123 時間: 2020-6-19 16:17
你把聲明#include<at24c02.h>換成#include "at2402.h"試試

作者: lll1472589 時間: 2020-6-20 11:14

SKYLAR123 發表于 2020-6-19 16:17
你把聲明#include換成#include "at2402.h"試試

還是不行，它就變成這個了：智能鎖.c(12): error C309: bad or missing filename

作者: 昆明路口賣提莫 時間: 2020-6-20 14:20
你的At24c02 是不是main.c不在一個文件夾啊

作者: liqingb 時間: 2020-6-20 16:31
option-c/c++ -include path 里面添加試試

作者: SKYLAR123 時間: 2020-6-22 10:20

lll1472589 發表于 2020-6-20 11:14
還是不行，它就變成這個了：智能鎖.c(12): error C309: bad or missing filename

你為什么有兩個聲明51.h，你在定義AT2402.h中是怎么定義的，給你看一下我在定義i2c.h里面寫的內容
#ifndef __I2C_H_
#define __I2C_H_

#include<reg51.h>

//---重定義關鍵詞---//
#ifndef uchar
#define uchar unsigned char
#endif

#ifndef uint
#define uint unsigned int
#endif

//--定義使用的IO口--//
sbit I2C_SCL = P2^1;
sbit I2C_SDA = P2^0;

//--聲明全局變量--//
void I2C_Delay10us();
void I2C_Start();
void I2C_Stop();
uchar I2C_SendByte(uchar dat, uchar ack);
uchar I2C_ReadByte();

#endif

歡迎光臨 (http://www.zg4o1577.cn/bbs/)

<li id="smk22"></li>