- s32 main(void)
- {
- DMAInit();
- ADCSingleChannelInit(ADCchTemp);
- //Start Conversion
- ADC_SoftwareStartConvCmd(ADC1, ENABLE);
- APP_OLED_Init();
- OLED_Init();
- OLED_Clear();
- OLED_ShowString(0,0,"MM32F0133 ",16);
- OLED_ShowString(0,2,"Temp test",16);
- while(1)
- {
- //Determine whether the second-order filter is over
- if(ADCFilterflag) {
- //Clear the filter end flag
- ADCFilterflag = 0;
- //Convert the filtered value to voltage
- Get_Temperature();
- //Start Conversion
- ADC_SoftwareStartConvCmd(ADC1, ENABLE);
- }
- OLED_ShowString(0,5,"Temp= C",16);
- OLED_ShowNum(40,5,(int) ADCTempValue,4,16);
- }
- }
