奇米影视首页,一级免费毛片,国产亚洲精品一区二区

#include <SCoop.h>//引入頭文件
#include <OneWire.h>
#include <DallasTemperature.h>
#include <Wire.h>
#include <DS1302.h>
#include <Wire.h>
#include <SPI.h>
#include <Adafruit_Sensor.h>
#include <Adafruit_BMP280.h>
#include <dht11.h>
#include <SoftwareSerial.h>
dht11 DHT11;
SoftwareSerial esp8266(5, 6); //(rx,tx),聲明WIFI
#define DHT11PIN 4
#define BMP_SCK 13
#define BMP_MISO 12
#define BMP_MOSI 11
#define BMP_CS 10
Adafruit_BMP280 bmp(BMP_CS, BMP_MOSI, BMP_MISO, BMP_SCK);
DS1302 rtc(9, 8, 7); // RST, DAT, CLK
#define ONE_WIRE_BUS A0 //數據總線
OneWire oneWire(ONE_WIRE_BUS); //聲明
DallasTemperature sensors(&oneWire); //聲明
int x5 = A5;
String outa=""; //讀取溫度值存入變量
String outb=""; //讀取時間值存入變量
String outc=""; //讀取氣壓值存入變量
String outd=""; //讀取海拔值存入變量
String oute=""; //占用
String outf="空"; //空
String outh=""; //濕度
//WIFI變量
String AP = "padavan-2x";
String PASS = "12345678";
String Data;
int countTrueCommand;
int countTimeCommand;
boolean found = false;
//WIFI變量
void setup() {
mySCoop.start();
pinMode(x5, OUTPUT);
Serial.begin(9600);
sensors.begin(); //初始化總線
sensors.setWaitForConversion(false); //設置為非阻塞模式
}
void loop()
{
yield();
}
defineTaskLoop(Task1)//水泵
{
digitalWrite(x5, HIGH); // 點亮
sleep(3600000); // 等待
digitalWrite(x5, LOW); // 通過將引腳電平拉低，關閉
sleep(10000); // 等待
}
defineTaskLoop(Task2)//溫度
{
float tempC = sensors.getTempCByIndex(0); //獲取索引號0的傳感器攝氏溫度數據
if (tempC != DEVICE_DISCONNECTED_C) //如果獲取到的溫度正常
{
Serial.print("\n當前溫度是： ");
Serial.print(tempC);
Serial.println(" ℃");
}
//Serial.println("發起溫度轉換");
sensors.requestTemperatures(); //發起新的溫度轉換
//Serial.print(tempC); //打印當前溫度值
//outa=String(tempC)+"℃";
outa=String(tempC)+"℃";
sleep(1000);
}
/*
defineTaskLoop(Task3)//時間
{
outb=String(rtc.getDateStr(FORMAT_LONG, FORMAT_LITTLEENDIAN, '-'))+"-"+String(rtc.getTimeStr());
delay(1000);
}
*/
defineTaskLoop(Task4)//大氣壓
{
if (!bmp.begin())
{
Serial.println(F("找不到對應的傳感器"));
while (1);
}
/*
Serial.print(F("溫度 = "));
Serial.print(bmp.readTemperature());
Serial.println(" *C");
Serial.print(F("氣壓 = "));
Serial.print(bmp.readPressure());
Serial.println(" Pa");
Serial.print(F("海拔 = "));
Serial.print(bmp.readAltitude(1013.25));
Serial.println(" m");
*/
oute=String(Serial.print(F("")));
outc=String(bmp.readPressure())+"Pa";
outd=String(bmp.readAltitude(1013.25))+"m";
delay(1000);
}
defineTaskLoop(Task5)//濕度
{
int chk = DHT11.read(DHT11PIN);
switch (chk)
{
case DHTLIB_OK:
Serial.println("OK");
break;
case DHTLIB_ERROR_CHECKSUM:
// Serial.println("Checksum error");
break;
case DHTLIB_ERROR_TIMEOUT:
// Serial.println("Time out error");
break;
default:
// Serial.println("Unknown error");
break;
}
// 獲取測量數據
outh=String(((float)DHT11.humidity, 2));
delay(1000);
}
defineTaskLoop(Task6)//上傳
{
esp8266.begin(115200);
sendCommand("AT", 5, "OK");
sendCommand("AT+CWMODE=1", 5, "OK");
sendCommand("AT+CWJAP=\"" + AP + "\",\"" + PASS + "\"", 20, "OK");
Data = "GET /crzz.php?aa="+outh+"&ab="+outd+"&ac="+outc+"&ad="+outb+"&ae="+outa;
sendCommand("AT+CIPMUX=1",5,"OK");
sendCommand("AT+CIPSTART=0,\"TCP\",\"192.168.10.204\",80",4,"OK");
sendCommand("AT+CIPSEND=0," +String(Data.length()+4),2,">");
esp8266.println(Data);
delay(1000);
countTrueCommand++;
sendCommand("AT+CIPCLOSE=0",2,"OK");
}
void sendCommand(String command, int maxTime, char readReplay[]) {
Serial.print(countTrueCommand);
Serial.print(". at command => ");
Serial.print(command);
Serial.print(" ");
while (countTimeCommand < (maxTime * 1))
{
esp8266.println(command);//at+cipsend
if (esp8266.find(readReplay)) //ok
{
found = true;
break;
}
countTimeCommand++;
}
if (found == true)
{
Serial.println("Yes");
countTrueCommand++;
countTimeCommand = 0;
}
if (found == false)
{
Serial.println("Fail");
countTrueCommand = 0;
countTimeCommand = 0;
}
found = false;
}

復制代碼

久久久久久久999_99精品久久精品一区二区爱城_成人欧美一区二区三区在线播放_国产精品日本一区二区不卡视频_国产午夜视频_欧美精品在线观看免费