久久久久久久999_99精品久久精品一区二区爱城_成人欧美一区二区三区在线播放_国产精品日本一区二区不卡视频_国产午夜视频_欧美精品在线观看免费

標題: 立方燈原碼 [打印本頁]

作者: 哈嘍，夏天 時間: 2017-11-20 10:54
標題: 立方燈原碼
#include"3d8.h"
#include<reg52.h>
void reset()//復位
{
Y=0xff;
Z=0x00;
X=0x00;
}
void delay(uint z)//延時函數
{
uint x,y;
for(x=z;x>0;x--)
      for(y=10;y>0;y--);
}
void delay_ms(uint z)//毫秒延時函數
{
uint x,y;
for(x=z;x>0;x--)
~ 4 / 9 ~
      for(y=10;y>0;y--);
}
void value_YZ_face(uchar x_date,uchar time)
{
reset();
Y=0xff;
X=x_date;
Z=~0xff;
delay(time);
}
void value_XZ_face(uchar y_date,uchar time)
{
reset();
Y=y_date;
X=0xff;
Z=~0xff;
delay(time);
}
void value_XY_face(uchar z_date,uchar time)
{
reset();
Y=0xff;
X=0xff;
Z=~z_date;
delay(time);
}
void set_dot(uchar x,uchar y,uchar z,bit status,uchar time)
{
reset();
if(status)
      {
      Y = (1<<y);
      Z =~(1<<z);
      X = (1<<x);
      }
else
      {
      Y =~(1<<y);
      Z = (1<<z);
      X =~(1<<x);

      }
delay(time);
}
void set_line_X(uchar y,uchar z,uchar x_date,bit status,uchar time)//平行于X軸的線
{
reset();
if(status)
      {
      Y = (1<<y);
      Z =~(1<<z);
      }
else
      {
      Y =~(1<<y);
      Z = (1<<z);
      }
X=x_date;
delay(time);
}
void set_line_Y(uchar x,uchar z,uchar y_date,bit status,uchar time)//平行于Y軸的線
{
reset();
Y=y_date;
if(status)
      {
      Z =~(1<<z);
      X = (1<<x);
      }
else
      {
      Z = (1<<z);
      X =~(1<<x);
      }

delay(time);
}
void set_line_Z(uchar x,uchar y,uchar z_date,bit status,uchar time)//平行于Z軸的線
{ reset(); if(status)       {       Y = (1<<y);       Z=z_date;       X = (1<<x);       } else       {       Y =~(1<<y);       Z=z_date;       X =~(1<<x);       }    delay(time);}void set_line(uchar x1,uchar y1,uchar z1,uchar x2,uchar y2,uchar z2,bit status,uchar time)//通過兩點坐標生成直線{ uchar i,i1,i2,x_flag=0,y_flag=0,z_flag=0; char x,y,z; x=x1-x2;y=y1-y2;z=z1-z2;          if(x!=0)       {       if(x<0)          {i=x2-x1;x_flag=2;}       else             {i=x1-x2;x_flag=1;}             }          if(y!=0)       {       if(y<0)          {i=y2-y1;y_flag=2;}       else             {i=y1-y2;y_flag=1;}       }             if(z!=0)       {       if(z<0)          {i=z2-z1;z_flag=2;}       else             {i=z1-z2;z_flag=1;}       }       /*SBUF='0'+i;             while(!TI);             TI=0;       SBUF=' ';             while(!TI);             TI=0;       SBUF='0'+x_flag;             while(!TI);             TI=0;       SBUF=' ';             while(!TI);             TI=0;       SBUF='0'+y_flag;             while(!TI);             TI=0;       SBUF=' ';             while(!TI);             TI=0;       SBUF='0'+z_flag;             while(!TI);             TI=0;       SBUF=' ';             while(!TI);             TI=0;*/             //i=x2-x1;x_flag=2;y_flag=2;z_flag=2;                                  for(i2=time;i2>0;i2--)       {~ 6 / 9 ~       x=x1;y=y1;z=z1;       for(i1=i+1;i1>0;i1--)          {          set_dot(x,y,z,status,3);          /*          switch(x_flag)             {             case 0: ;break;             case 1:x-=1;break;             case 2:x+=1;break;             }          switch(y_flag)             {             case 0: ;break;             case 1:y-=1;break;             case 2:y+=1;break;             }          switch(z_flag)             {             case 0: ;break;             case 1:z-=1;break;             case 2:z+=1;break;             }*/          if(x_flag==1)             x-=1;          if(x_flag==2)             x+=1;          if(y_flag==1)             y-=1;          if(y_flag==2)             y+=1;          if(z_flag==1)             z-=1;          if(z_flag==2)             z+=1;          }       }}void set_solid_cube(uchar x1,uchar y1,uchar z1,uchar x2,uchar y2,uchar z2,bit status,uchar time)//實心立方體{ uchar X1,Y1,Z1,t; if(x1>x2)       {t=x1;x1=x2;x2=t;}          if(y1>y2)       {t=y1;y1=y2;y2=t;} if(z1>z2)       {t=z1;z1=z2;z2=t;} reset(); X1 = ((0xff<<x1)&(0xff>>(7-x2))); Y1 = ((0xff<<y1)&(0xff>>(7-y2))); Z1 =~((0xff<<z1)&(0xff>>(7-z2))); if(status)       {Y = Y1;X = X1;Z = Z1;} else       {Y =~Y1;X =~X1;Z =~Z1;} delay(time*10);       }void set_frame_cube(uchar x1,uchar y1,uchar z1,uchar x2,uchar y2,uchar z2,bit status,uchar time)//框架立方體~ 7 / 9 ~{ uchar X1,Y1,Z1,t,i; if(x1>x2)       {t=x1;x1=x2;x2=t;}       /*SBUF='0'+x1;             while(!TI);             TI=0;       SBUF=' ';             while(!TI);             TI=0;       SBUF='0'+x2;             while(!TI);             TI=0;       SBUF=' ';             while(!TI);             TI=0;*/ if(y1>y2)       {t=y1;y1=y2;y2=t;}       /*SBUF='0'+y1;             while(!TI);             TI=0;       SBUF=' ';             while(!TI);             TI=0;       SBUF='0'+y2;             while(!TI);             TI=0;       SBUF=' ';             while(!TI);             TI=0;*/ if(z1>z2)       {t=z1;z1=z2;z2=t;}       /*SBUF='0'+z1;             while(!TI);             TI=0;       SBUF=' ';             while(!TI);             TI=0;       SBUF='0'+z2;             while(!TI);             TI=0;       SBUF=' ';             while(!TI);             TI=0;*/ reset(); X1 = ((0xff<<x1)&(0xff>>(7-x2))); Y1 = ((0xff<<y1)&(0xff>>(7-y2))); Z1 =~((0xff<<z1)&(0xff>>(7-z2))); for(i=time;i>0;i--)       {       set_line_X(y1,z1,X1,status,5);       set_line_X(y1,z2,X1,status,5);       set_line_X(y2,z1,X1,status,5);       set_line_X(y2,z2,X1,status,5);          set_line_Y(x1,z1,Y1,status,5);       set_line_Y(x1,z2,Y1,status,5);~ 8 / 9 ~       set_line_Y(x2,z1,Y1,status,5);       set_line_Y(x2,z2,Y1,status,5);          set_line_Z(x1,y1,Z1,status,5);       set_line_Z(x1,y2,Z1,status,5);       set_line_Z(x2,y1,Z1,status,5);       set_line_Z(x2,y2,Z1,status,5);       /*SBUF='0'+y1;             while(!TI);             TI=0;       SBUF=' ';             while(!TI);             TI=0;       SBUF='0'+y2;             while(!TI);             TI=0;       SBUF=' ';             while(!TI);             TI=0;*/       }}

作者: 凌鴆 時間: 2019-5-29 16:44
這啥都沒有也看不懂啊

歡迎光臨 (http://www.zg4o1577.cn/bbs/)

<li id="2eeoa"></li>