16*96LED點陣屏proteus仿真設計含單片機源碼

ID:407381 · 發表于 2018-10-10 15:20

16*96LED點陣屏單片機課程設計的圖：

單片機源程序如下:

#include<reg51.h>
typedef unsigned char uchar;
typedef unsigned int uint;
sbit E1=P3^4;
sbit ST=P3^5;
sbit SS=P3^6;
unsigned char code mo[6][2][16]=
{{{
0xF7,0xF7,0xF6,0xF6,0xF7,0xF7,0xF6,0xF6,0xF7,0x87,0xF0,0xF7,0xF7,0xF7,0xF7,0xF7},
{0xEF,0x47,0xF0,0xF7,0xF7,0x40,0xF7,0xE3,0xD3,0xF5,0x35,0xF6,0xF7,0xF7,0xF7,0xF7}},
{{0xFF,0x80,0xFB,0xFB,0xFB,0xC0,0xDB,0xDB,0xDB,0xDB,0xDB,0xD3,0xEB,0xFB,0xFB,0xFB},
{0xEF,0x2F,0xED,0xED,0xED,0x6D,0x6D,0x6D,0x6D,0x6D,0x6D,0x6F,0x77,0xF7,0xFB,0xFD}},
{{0xFE,0xFE,0xFE,0xC0,0xDF,0xEF,0xFD,0xFD,0xFD,0xFA,0xFA,0xF7,0xF7,0xEF,0xDF,0xBF},
{0xFF,0xFF,0xC0,0xDF,0x5F,0x6D,0xAB,0xD7,0xF7,0xEB,0xDB,0x5D,0x7E,0xBF,0xDF,0xEF}},
{{0xFF,0xFE,0xC3,0xDB,0xDB,0xDB,0xDB,0xDB,0xDB,0xD2,0xEB,0xFB,0xFB,0xFB,0x80,0xFF},
{0xFF,0xFB,0x37,0xB7,0xBF,0xBF,0xB0,0xB7,0xB7,0xB7,0x37,0xB7,0xF7,0xEB,0x1D,0xFF}},
{{0xFE,0xFE,0xFE,0x80,0xBF,0xDF,0xFB,0xFB,0xEB,0xDB,0xDB,0xBB,0xBB,0xFB,0xFA,0xFD},
{0xEF,0xEF,0xEF,0x77,0x77,0xB3,0xD3,0xF5,0x76,0x77,0xB7,0xB7,0xD7,0xF7,0xF7,0xF7}},
{{0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF},
{0xFF,0xF7,0xF7,0xF7,0xF7,0xF7,0xF7,0xF7,0xF7,0xF7,0xFF,0xFF,0xF7,0xF7,0xFF,0xFF}}};
void yiwei(int i,int j,int k)
{
SBUF=mo[i][j][k];
while(~TI){};
TI=0;
}
void main() /*主函數*/
{ int i=0,j=0,k=0,n,u;
uchar l=0;
SM0=0;
SM1=0;
ST=0;
TI=0;
yiwei(i,j,k);
n=0;
while(1){
{for(i=0;i<6-0;i++)
{yiwei(i,0,k);
yiwei(i,1,k);
}
i=0;
k++;
if(k>15)
k=0;
P2=n;
E1=0;
ST=1;
for(u=0;u<300;u++){}
n++;
if(n>16)
n=0;
E1=1;
ST=0;
}
}
}