51單片機自動紅外洗手器程序+Proteus仿真

ID:511094 · 發表于 2020-5-23 17:50

仿真原理圖如下（proteus仿真工程文件可到本帖附件中下載）

單片機源程序如下:
#include<reg52.h>
#include<intrins.h>
#include"Delay.h"
#include "Time.h"
#include "L298.h"
#include "main.h"
#include "ADC0832.h"

#define uint unsigned int
#define uchar unsigned char

unsigned long volt;//測量的電壓值
unsigned char volt1=0;

unsigned char OPEN_Flag=0;
unsigned char one_times=0;

/*----------------------------------------------------------------------------------
                                    main()_程序入口
----------------------------------------------------------------------------------*/
void main(void)
{
      TIME_Init();             //定時器初始化
      stop();
      while(1)
      {
               ADC0832_data();
            if( volt1 >= 16 )
            {
                     OPEN_Flag = 1;
                     one_times = 1;
            }
            else
            {
                     OPEN_Flag = 0;
                     if( one_times == 1 )
                     {
                              turn_left();
                              Delay_ms( 1000 );
                              one_times = 0;
                     }
                     stop();
            }
      }
}

全部資料51hei下載地址：

程序代碼.rar (40.34 KB, 下載次數: 94)

仿真.rar (95.77 KB, 下載次數: 85)