TIME4控制4路PWM C程序
#include "pwm1.h"
#include "led.h"
//TIM4 PWM部分初始化
//PWM輸出初始化
//arr：自動重裝值
//psc：時鐘預分頻數
//定時器3中斷服務程序
void TIM4_IRQHandler(void) //TIM4中斷
{
if (TIM_GetITStatus(TIM4, TIM_IT_Update) != RESET) //檢查TIM4更新中斷發生與否
{
TIM_ClearITPendingBit(TIM4, TIM_IT_Update ); //清除TIMx更新中斷標志
LED1=!LED1;
}
}
void TIM4_PWM_Init(u32 arr,u32 psc)
{
//此部分需手動修改IO口設置
GPIO_InitTypeDef GPIO_InitStructure;
TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
TIM_OCInitTypeDef TIM_OCInitStructure;
// NVIC_InitTypeDef NVIC_InitStructure;
RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM4,ENABLE); //TIM4時鐘使能
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOB, ENABLE); //使能PORTC時鐘
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6|GPIO_Pin_7|GPIO_Pin_8|GPIO_Pin_9; //GPIOB6
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF; //復用功能
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz; //速度100MHz
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; //推挽復用輸出
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL; //上拉
GPIO_Init(GPIOB,&GPIO_InitStructure); //初始化PC6
//設置該引腳為復用輸出功能,輸出TIM4 CH1的PWM脈沖波形GPIOB.6
GPIO_PinAFConfig(GPIOB,GPIO_PinSource6,GPIO_AF_TIM4); //GPIOB6復用為定時器3
GPIO_PinAFConfig(GPIOB,GPIO_PinSource7,GPIO_AF_TIM4);
GPIO_PinAFConfig(GPIOB,GPIO_PinSource8,GPIO_AF_TIM4);
GPIO_PinAFConfig(GPIOB,GPIO_PinSource9,GPIO_AF_TIM4);
TIM_TimeBaseStructure.TIM_Prescaler=psc; //定時器分頻
TIM_TimeBaseStructure.TIM_CounterMode=TIM_CounterMode_Up; //向上計數模式
TIM_TimeBaseStructure.TIM_Period=arr; //自動重裝載值
TIM_TimeBaseStructure.TIM_ClockDivision=TIM_CKD_DIV1;
TIM_TimeBaseInit(TIM4,&TIM_TimeBaseStructure);//初始化定時器3
//初始化TIM4 Channel PWM模式
TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM2; //選擇定時器模式:TIM脈沖寬度調制模式2
TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable; //比較輸出使能
TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_Low; //輸出極性:TIM輸出比較極性低
TIM_OC1Init(TIM4, &TIM_OCInitStructure); //根據T指定的參數初始化外設TIM4OC1
TIM_OC1PreloadConfig(TIM4, TIM_OCPreload_Enable); //使能TIM4在CCR1上的預裝載寄存器
TIM_OC2Init(TIM4, &TIM_OCInitStructure);
TIM_OC2PreloadConfig(TIM4, TIM_OCPreload_Enable);
TIM_OC3Init(TIM4, &TIM_OCInitStructure);
TIM_OC3PreloadConfig(TIM4, TIM_OCPreload_Enable);
TIM_OC4Init(TIM4, &TIM_OCInitStructure);
TIM_OC4PreloadConfig(TIM4, TIM_OCPreload_Enable);
TIM_ARRPreloadConfig(TIM4,ENABLE);//ARPE使能
TIM_Cmd(TIM4, ENABLE); //使能TIM4
全部程序51hei下載地址：
PWM -20200919.7z
(345.67 KB, 下載次數: 105)
2020-9-22 14:51 上傳
點擊文件名下載附件
PWM 下載積分: 黑幣 -5
|
QQ好友和群
QQ空間
騰訊微博
騰訊朋友
收藏
淘帖
頂
踩
