IoT-32-New_project\IoT-32-New_project.axf: Error: L6200E: Symbol __asm___8_MyInit_c_MyInit____REV16 multiply defined (by myinit_1.o and myinit.o).
IoT-32-New_project\IoT-32-New_project.axf: Error: L6200E: Symbol __asm___8_MyInit_c_MyInit____RRX multiply defined (by myinit_1.o and myinit.o).
IoT-32-New_project\IoT-32-New_project.axf: Error: L6200E: Symbol MyInit multiply defined (by myinit_1.o and myinit.o).
IoT-32-New_project\IoT-32-New_project.axf: Error: L6200E: Symbol __asm___8_Public_c____REV16 multiply defined (by public_1.o and public.o).
IoT-32-New_project\IoT-32-New_project.axf: Error: L6200E: Symbol __asm___8_Public_c____RRX multiply defined (by public_1.o and public.o).
IoT-32-New_project\IoT-32-New_project.axf: Error: L6200E: Symbol __asm___8_System_c_System____REV16 multiply defined (by system_1.o and system.o).
IoT-32-New_project\IoT-32-New_project.axf: Error: L6200E: Symbol __asm___8_System_c_System____RRX multiply defined (by system_1.o and system.o).
IoT-32-New_project\IoT-32-New_project.axf: Error: L6200E: Symbol System multiply defined (by system_1.o and system.o).
Not enough information to list image symbols.
Not enough information to list the image map.
Finished: 2 information, 0 warning and 11 error messages.
今天看視頻學習出現了這個錯誤，我是在復制代碼的基礎上更改的，視頻的每個步驟我都跟著做，反復看了幾遍視頻發現步驟沒錯，只能是復制的代碼出錯了。到網上搜索了半天沒有找到解決辦法。我一直以為“重復定義”是因為某個符號在某個.h或.c文件下重復定義了，點開myint.c和myint.h文件比對一個參考代碼沒有發現錯誤，挑選幾個其他.c和.h文件也沒有找到錯誤，后來我突然發現在project的子目錄下有兩個子文件夾里有重復的.c文件，刪掉一個問題解決。
問題的發現：
問題的解決：
|
