#include "reg52.h" /*包含STC單片機頭文件*/
#include "QX51/qx51.h" /*包含qx51開發板頭文件*/
#include "DELAY/delay.h"/*包含delay延時函數文件*/
#include "DS1602/ds1602.h" //包含1602驅動
#include "NRF/NRFreceive.h"//包涵NRF驅動
uchar buf0[5]={0,0,0,0,0}; //用于儲存NRF接收地址的數組
void main()
{
qx51_init();//QX開發板初始化
init_1602();//1602初始化
nrf24l01_init(); //NRF初始化
setRX_Mode(); //設置為接收模式
SPI_Read_Buf(READ_REG+RX_ADDR_P0,buf0,TX_PLOAD_WIDTH); //讀NRF的接收地址
delay_ms(100);
lcd_dis(0,0,"RX_ADDR_P0:"); //提示顯示NRF接收端的地址
/************************************************/
//執行顯示NRF的接收地址到1602上
lcd_dis(1,0,uchartostr(buf0[0]));
lcd_dis(1,2," ");
lcd_dis(1,3,uchartostr(buf0[1]));
lcd_dis(1,5," ");
lcd_dis(1,6,uchartostr(buf0[2]));
lcd_dis(1,8," ");
lcd_dis(1,9,uchartostr(buf0[3]));
lcd_dis(1,11," ");
lcd_dis(1,12,uchartostr(buf0[4]));
delay_ms(5000);
write_com(0x01); //清屏幕指令，將以前的顯示內容清除
delay_ms(5);
/************************************************/
/************************************************/
//讀NRF STATUS的值 STATUS上電復位后的值為14
lcd_dis( 0,0,"NRF-STATUS:");
lcd_dis( 0,12,uchartostr( SPI_Read(STATUS) ) );
//讀NRF CONFIG的值 CONFIG在接收模式下為15 如何把 setRX_Mode() 注解掉就為上電復位值8
lcd_dis( 1,0,"NRF-CONFIG:");
lcd_dis( 1,12,uchartostr( SPI_Read(CONFIG) ) );
/************************************************/
while(1);
} |
QQ好友和群
QQ空間
騰訊微博
騰訊朋友
收藏
淘帖
頂
踩
