單片機按鍵控制步進電機的程序修改

ID:978416 · 發表于 2023-2-21 14:59

寫了個按鍵控制步進電機的程序，按鍵控制正反轉和停止，但是因為用了延時導致按鍵不太好用，各位給看看要是用定時器實現，需要怎么改一下，或者有什么更好，更簡潔的方法

單片機源程序如下:
#include "reg52.h"                      //此文件中定義了單片機的一些特殊功能寄存器
#define uchar unsigned char
#define uint unsigned int
sbit MOTOA = P1^0;       //定義A極
sbit MOTOB = P1^1;       //定義B極
sbit MOTOC = P1^2;       //定義C極
sbit MOTOD = P1^3;       //定義D極
sbit key1  = P0^0;
sbit key2  = P0^1;
sbit key3  = P0^2;
sbit key4  = P0^3;
void keyscan();
#define SPEED 400
void delay(uint i)       //延時函數
{
      while(i--);
}
void main()
{
      P1=0X00;
      while(1)
      {
      keyscan();
      }
}
void keyscan()
{
      if(key1==0)
      {
            delay(10);
            if(key1==0)
            {
            while(1)
            {

            MOTOA = 0;
            MOTOB = 0;
            MOTOC = 0;
            MOTOD = 0;
            delay(SPEED);//延時

            MOTOA = 0;
            MOTOB = 0;
            MOTOC = 0;
            MOTOD = 0;
            delay(SPEED);

            MOTOA = 0;
            MOTOB = 0;
            MOTOC = 0;
            MOTOD = 0;
            delay(SPEED);

            MOTOA = 0;
            MOTOB = 0;
            MOTOC = 0;
            MOTOD = 0;
            delay(SPEED);
            if(key2==0||key3==0||key4==0)break;
            }
            }
      }
      if(key2==0)
      {
            delay(10);
            if(key2==0)
            {
            while(1)
            {
            MOTOA = 0;
            MOTOB = 1;
            MOTOC = 1;
            MOTOD = 1;
            delay(SPEED);//延時

            MOTOA = 1;
            MOTOB = 0;
            MOTOC = 1;
            MOTOD = 1;
            delay(SPEED);

            MOTOA = 1;
            MOTOB = 1;
            MOTOC = 0;
            MOTOD = 1;
            delay(SPEED);

            MOTOA = 1;
            MOTOB = 1;
            MOTOC = 1;
            MOTOD = 0;
            delay(SPEED);
            if(key1==0||key3==0||key4==0)break;
            }
            }
      }
      if(key3==0)
      {
            delay(10);
            if(key3==0)
            {
            while(1)
            {
            MOTOA = 1;
            MOTOB = 1;
            MOTOC = 1;
            MOTOD = 0;
            delay(SPEED);//延時

            MOTOA = 1;
            MOTOB = 1;
            MOTOC = 0;
            MOTOD = 1;
            delay(SPEED);

            MOTOA = 1;
            MOTOB = 0;
            MOTOC = 1;
            MOTOD = 1;
            delay(SPEED);

            MOTOA = 0;
            MOTOB = 1;
            MOTOC = 1;
            MOTOD = 1;
            delay(SPEED);
            if(key1==0||key2==0||key4==0)break;
            }
            }
      }
      if(key4==0)
      {
            delay(10);
            if(key4==0)
            {
            while(1)
            {
            MOTOA = 1;
            MOTOB = 1;
            MOTOC = 1;
            MOTOD = 1;
            delay(SPEED);//延時

            MOTOA = 1;
            MOTOB = 1;
            MOTOC = 1;
            MOTOD = 1;
            delay(SPEED);

            MOTOA = 1;
            MOTOB = 1;
            MOTOC = 1;
            MOTOD = 1;
            delay(SPEED);

            MOTOA = 1;
            MOTOB = 1;
            MOTOC = 1;
            MOTOD = 1;
            delay(SPEED);
            if(key1==0||key2==0||key3==0)break;
            }
            }
      }
}

ID:384109 · 發表于 2023-2-21 16:26

步進電機控制放到定時器里

帳號		自動登錄	找回密碼
密碼			立即注冊

久久久久久久999_99精品久久精品一区二区爱城_成人欧美一区二区三区在线播放_国产精品日本一区二区不卡视频_国产午夜视频_欧美精品在线观看免费

單片機按鍵控制步進電機的程序修改