單片機控制可控硅調光程序編好了,但是proteus仿真沒實現

ID:1137796 · 發表于 2024-11-30 14:55

程序編好了，但是proteus仿真沒實現

ID:584814 · 發表于 2024-12-2 08:54

深呼吸，然后刷新，然后就好了

ID:1093493 · 發表于 2024-12-2 10:06

沒圖沒程序不知知道你想要表達什么？

ID:1137796 · 發表于 2024-12-2 10:09

#include <REGX52.H> #include "Delay.h" #include "INT0.h" #include "Timer0.h" #include "Key.h" sbit ChuFa= P1^0; unsigned char n; unsigned code LiangDu_tab[100]={100,200,300,400,500,600,700,800,900,1000, 1100,1200,1300,1400,1500,1600,1700,1800,1900,2000, 2100,2200,2300,2400,2500,2600,2700,2800,2900,3000, 3100,3200,3300,3400,3500,3600,3700,3800,3900,4000, 4100,4200,4300,4400,4500,4600,4700,4800,4900,5000, 5100,5200,5300,5400,5500,5600,5700,5800,5900,6000, 6100,6200,6300,6400,6500,6600,6700,6800,6900,7000, 7100,7200,7300,7400,7500,7600,7700,7800,7900,8000, 8100,8200,8300,8400,8500,8600,8700,8800,8900,9000, 9100,9200,9300,9400,9500,9600,9700,9800,9900,10000, }; void main() { Timer0Init(); Int0_Init(); ChuFa=0; while(1) { //等待中斷 } } void Int0_Routine(void) interrupt 0 { ChuFa=1; n=Key(); TL0 =65536-LiangDu_tab[n]%256; //設置定時初值 TH0 =65536-LiangDu_tab[n]/256; //設置定時初值 TR0=1; } void Timer0_Routine() interrupt 1 { ChuFa=0; Delay10us(); ChuFa=1; TR0=0; }

ID:1137796 · 發表于 2024-12-2 10:12

#include <REGX52.H>
#include "Delay.h"
#include "INT0.h"
#include "Timer0.h"
#include "Key.h"
sbit ChuFa= P1^0;
unsigned char n;
unsigned code LiangDu_tab[100]={100,200,300,400,500,600,700,800,900,1000,
                              1100,1200,1300,1400,1500,1600,1700,1800,1900,2000,
                              2100,2200,2300,2400,2500,2600,2700,2800,2900,3000,
                              3100,3200,3300,3400,3500,3600,3700,3800,3900,4000,
                              4100,4200,4300,4400,4500,4600,4700,4800,4900,5000,
                              5100,5200,5300,5400,5500,5600,5700,5800,5900,6000,
                              6100,6200,6300,6400,6500,6600,6700,6800,6900,7000,
                              7100,7200,7300,7400,7500,7600,7700,7800,7900,8000,
                              8100,8200,8300,8400,8500,8600,8700,8800,8900,9000,
                              9100,9200,9300,9400,9500,9600,9700,9800,9900,10000,
                                                                              };
void main()
{
Timer0Init();
Int0_Init();
ChuFa=0;
while(1)
{
   //等待中斷
}
}

void Int0_Routine(void) interrupt 0
{
ChuFa=1;
n=Key();
TL0 =65536-LiangDu_tab[n]%256; //設置定時初值
TH0 =65536-LiangDu_tab[n]/256; //設置定時初值
TR0=1;
}
void Timer0_Routine() interrupt 1
{
ChuFa=0;
  Delay10us();
ChuFa=1;
TR0=0;
}
key（）：
#include <REGX52.H>
#include "Delay.h"
#include <INTRINS.H>
sbit KeyUp= P1^1;
sbit KeyDown= P1^2;
unsigned char Key()
{
unsigned char n=0;
unsigned char x=0;
unsigned char y=0;
if(KeyUp==0)
{
Delay(20);
while(KeyUp==0)
{
n++;
for(x=0;x<20;x++)
{
if(n>=99)n=99;
}
}
Delay(20);
n=n+5;
if(n>=99)n=99;
}
if(KeyDown==0)
{
Delay(20);
while(KeyDown==0)
{
n--;
for(y=0;y<20;y++)
{
if(n<=0)n=0;
}
}
Delay(20);
n=n-5;
if(n<=0)n=0;
}
return n;
}
程序這樣編的，外部中斷能進去，定時器中斷好像沒作用，key.c我想寫的是，按下按鍵不松手就會一直n++亮度會遞增，按鍵松手就n+5亮度階梯增加，兩個功能一個是按下不松手亮度逐漸變化，一個是按下松手每按一下亮度變化一下

ID:1133081 · 發表于 2024-12-2 11:11

仿真不能看出燈光亮度變化，可以用仿真軟件自帶的虛擬示波器看導通角波形以證實調光。

帳號		自動登錄	找回密碼
密碼			立即注冊

久久久久久久999_99精品久久精品一区二区爱城_成人欧美一区二区三区在线播放_国产精品日本一区二区不卡视频_国产午夜视频_欧美精品在线观看免费

單片機控制可控硅調光程序編好了,但是proteus仿真沒實現