 
這個圖我改了一下 ： 在接收線圈的整流電路 我用的是全橋整流，因為我用半波整流驅動不起來，損耗太大。還有就是電機要串上調壓電阻。以便不用改變程序的移位速度。還有最好用貼片 減輕其重量。
程序：
#include <AT89X52.h>
#define uchar unsigned char
#define uint unsigned int //宏定義
sbit KEY=P3^2;
sbit led1=P1^1;
unsigned char code love[] = {
0xBF,0xFB,0xBB,0xFB,0xAB,0xFD,0xAB,0xFE,0x2B,0x01,0xAB,0x6D,0x8B,0x6D,0xA0,0x6D,0xAB,0x6D,0xAB,0x6D,0x2B,0x01,0xAB,0xFE,0xAB,0xFD,0xBB,0xFB,0xBF,0xFB,0xFF,0xFF,/*"春",0*/
0xFB,0xFF,0xBB,0xFF,0xBB,0xFF,0xBB,0xFF,0xA0,0xFF,0xBB,0xFF,0x3B,0x00,0xBB,0xFF,0xBB,0xFF,0xBB,0xF7,0xA0,0xEF,0xBB,0xF7,0x3B,0xF8,0xFB,0xFF,0xFB,0xFF,0xFF,0xFF,/*"節",1*/
0xFF,0xFE,0x1F,0xFF,0xFF,0xFF,0x00,0x00,0xEF,0xFF,0xDF,0x7E,0xF7,0xBE,0xF7,0xCE,0xF7,0xF2,0x00,0xFC,0xF7,0xF2,0xF7,0xCE,0x07,0xBE,0xFF,0x7E,0xFF,0x7E,0xFF,0xFF,/*"快",2*/
0xFF,0xFF,0xFF,0xDF,0x1F,0xEF,0x63,0xF7,0x7B,0xF9,0x7B,0xBF,0x7B,0x7F,0x0B,0x80,0x7D,0xFF,0x7D,0xFF,0x7C,0xFD,0x7D,0xFB,0x7F,0xF7,0x7F,0xCF,0xFF,0xFF,0xFF,0xFF,/*"樂",3*/
};
/*****n（us）延時子程序*****/
void DelayUs(uint N)
{
uint x ;
for(x=0;x<=N;x++);
}
/*****主函數*****/
void main(void)
{
uint i=0,j=0 ;
led1=0 ;
//主程序中只檢測按鍵
while(1)
{
if(KEY==0)
{
j++;
if(j>740)
{
j=0 ;
}
for(i=j;i<30+j;i++)
{
P0=love[i*2];
P2=love[i*2+1];
DelayUs(60);
P0=0XFF;
P2=0XFF;
}
}
}
}
/*****END*****/
|
[復制鏈接]
QQ好友和群
QQ空間
騰訊微博
騰訊朋友
收藏
淘帖
頂
踩
