|
|
/**
******************************************************************************
* @file Project/main.c
* @author MCD Application Team
* @version V2.1.0
* @date 18-November-2011
* @brief Main program body
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm8s.h"
/* Private defines -----------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
#define LED_GPIO_PORT (GPIOE)
#define LED_GPIO_PINS (GPIO_PIN_5)
void Delay(uint16_t nCount)
{
/* Decrement nCount value */
while (nCount != 0)
{
nCount--;
}
}
void main(void)
{
/* Initialize I/Os in Output Mode */
//GPIO_Init(LED_GPIO_PORT, (GPIO_Pin_TypeDef)LED_GPIO_PINS, GPIO_MODE_OUT_PP_LOW_FAST);
GPIO_Init(GPIOE, GPIO_PIN_5, GPIO_MODE_OUT_PP_HIGH_FAST);
GPIO_Init(GPIOD, GPIO_PIN_ALL, GPIO_MODE_OUT_OD_LOW_FAST);
while (1)
{
/* Toggles LEDs */
//GPIO_WriteReverse(LED_GPIO_PORT, (GPIO_Pin_TypeDef)LED_GPIO_PINS);
//GPIO_WriteReverse(GPIOE, GPIO_PIN_5);
GPIO_Write(GPIOE, 0x20);
GPIO_Write(GPIOD, 0xFE);
Delay(0xFFFF);
GPIO_Write(GPIOD, 0xFD);
Delay(0xFFFF);
GPIO_Write(GPIOD, 0xFB);
Delay(0xFFFF);
GPIO_Write(GPIOD, 0xF7);
Delay(0xFFFF);
GPIO_Write(GPIOD, 0xEF);
Delay(0xFFFF);
GPIO_Write(GPIOD, 0xDF);
Delay(0xFFFF);
GPIO_Write(GPIOD, 0xBF);
Delay(0xFFFF);
GPIO_Write(GPIOD, 0x7F);
Delay(0xFFFF);
GPIO_Write(GPIOE, 0x00);
Delay(0xFFFF);
Delay(0xFFFF);
Delay(0xFFFF);
}
}
#ifdef USE_FULL_ASSERT
/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval : None
*/
void assert_failed(u8* file, u32 line)
{
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* Infinite loop */
while (1)
{
}
}
#endif
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
|
|
