用8051單片機與1601LCD設計的計算器匯編語言

ID:155292 · 發表于 2016-12-16 16:54

用8051與1601LCD設計的計算器
protues仿真原理圖如下：

所有資料下載：

40 用8051與1601LCD設計的計算器.rar (35.26 KB, 下載次數: 25)

單片機匯編源碼（部分內容預覽）：

/******************************************************************************
************ LABCENTER ELECTRONICS ************
************ Proteus VSM Sample Design Code ************
************ Integer Calculator ( 2K Code Limit) ************
********************************************************************************/
NAME LCD
;Set up Code Segment and exports:
LCD SEGMENT CODE
RSEG LCD
PUBLIC _output
PUBLIC initialise
PUBLIC clearscreen
;LCD Register Addresses.
LCD_CMD_WR equ 00h
LCD_DATA_WR equ 01h
LCD_BUSY_RD equ 02h
LCD_DATA_RD equ 03h
LCD_PAGE equ 80h
;LCD Commands
LCD_CLS equ 1
LCD_HOME equ 2
LCD_SETMODE equ 4
LCD_SETVISIBLE equ 8
LCD_SHIFT equ 16
LCD_SETFUNCTION equ 32
LCD_SETCGADDR equ 64
LCD_SETDDADDR equ 128
; Initialisation Routine for the LCD display.
initialise:
mov A,#030h ;1 line, 8 bits
call wrcmd
mov A,#LCD_SETVISIBLE + 4
call wrcmd
mov A,#LCD_SETDDADDR+15 ; Start at right hand side of the display
call wrcmd
mov A,#LCD_SETMODE + 3 ; Automatic Increment - Display shift left.
call wrcmd
ret
; We move the parameter (held in R7) into the Accumulator prior to writing it.
_output:mov A,R7
call wrdata
ret
;Clears the LCD display and sets the initialisation conditions.
clearscreen:
mov A,#LCD_CLS
call wrcmd
mov A,#LCD_SETDDADDR + 15
call wrcmd
ret
;*****************************
;******** SUBROUTINES ********
;*****************************
;Sub routine to write command:
wrcmd: mov P2,#LCD_PAGE
mov R0,#LCD_CMD_WR
movx @R0,A
jmp wtbusy
; Subroutine to Write a Character to the LCD Display.
wrdata: MOV P2,#LCD_PAGE
MOV R0,#LCD_DATA_WR
MOV A,R7
MOVX @R0,A
; Subroutine to wait for a busy clear.
wtbusy: MOV R1,#LCD_BUSY_RD
MOVX A,@R1
JB ACC.7,wtbusy
ret
END