10秒秒表 精確到0.1
用proteus仿真
帶源文件
0.png (62.22 KB, 下載次數: 76)
下載附件
2017-3-3 21:55 上傳
仿真工程文件下載:
秒表.zip
(55.81 KB, 下載次數: 50)
2017-3-3 15:47 上傳
點擊文件名下載附件
秒表 下載積分: 黑幣 -5
源程序:
- /* 名稱:10s 的秒表
- 說明:首次按鍵計時開始,再次按鍵暫停,第三次按鍵清零。
- */
- #include<reg51.h>
- #define uchar unsigned char
- #define uint unsigned int
- sbit K1=P3^7;
- uchar
- i,Second_Counts,Key_Flag_Idx;
- bit Key_State;
- uchar
- DSY_CODE[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f};
- //延時
- void DelayMS(uint ms)
- {
- uchar t;
- while(ms--) for(t=0;t<120;t++);
- }
- //處理按鍵事件
- void Key_Event_Handle()
- {
- if(Key_State==0)
- {
- Key_Flag_Idx=(Key_Flag_Idx+1)%3;
- switch(Key_Flag_Idx)
- {
- case 1: EA=1;ET0=1;TR0=1;break;
- case 2: EA=0;ET0=0;TR0=0;break;
- case 0: P0=0x3f;P2=0x3f;i=0;Second_Counts=0;
- }
- }
- }
- //主程序
- void main()
- {
- P0=0x3f; //顯示 00
- P2=0x3f;
- i=0;
- Second_Counts=0;
- Key_Flag_Idx=0; //按鍵次數(取值 0,1,2,3)
- Key_State=1; //按鍵狀態
- TMOD=0x01; //定時器 0 方式 1
- TH0=(65536-50000)/256; //定時器 0:15ms
- TL0=(65536-50000)%256;
- while(1)
- {
- if(Key_State!=K1)
- {
- DelayMS(10);
- Key_State=K1;
- Key_Event_Handle();
- }
- }
- }
- //T0 中斷函數
- void DSY_Refresh() interrupt 1
- {
- TH0=(65536-50000)/256; //恢復定時器 0 初值
- TL0=(65536-50000)%256;
- if(++i==2) //50ms*2=0.1s 轉換狀態
- {
- i=0;
- Second_Counts++;
- P0=DSY_CODE[Second_Counts/10];
- P2=DSY_CODE[Second_Counts%10];
- if(Second_Counts==100) Second_Counts=0; //滿 100(10s)后顯示 00
- }
- }
復制代碼
|